782034
20
Zoom out
Zoom in
Previous page
1/60
Next page
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
20 І GB
11. This device was developed for use with a neutral
cleanser based on biodegradable anionic surface-
active agents. Use of other cleaning agents or
chemical substances can impair the safety of the
device and cause damage. Such damage to the
device is not covered under warranty. Only use
biodegradable fungicides, pesticides or herbicides
that do not corrode the stainless steel tank and
other device parts. Only use water-soluble addi-
tives and ensure that they have completely dis-
solved in the water. Otherwise, residue can clog
the pump, hose (26), lance (9) and nozzle (10).
12. Press the ‘Pump’ button (19) again to end opera-
tion. The ‘Pump’ LED (20) goes out.
13. Press actuate the activation lever (7) again in or-
der to de-pressurise the hose (25) and lance (9)
and remove the water.
Transport
1. Before any transport, turn the machine off and dis-
connect it from the power supply.
2. Please use only the handle (6) to transport the ma-
chine.
3. Protect the machine from blows, impact and strong
vibrations, e.g. during transport in vehicles.
4. Secure the machine against tilting and sliding.
5. Never use safety guards for handling or transport.
Cleaning
c Remove the mains plug before any work on
the machine. This also includes lling with water
or the attempt to remove leaks. Risk of electric
shock!
Do not hose the machine down with water and do
not clean it under running water. There is a risk of
electric shock and the machine can be damaged.
Always keep the machine clean. Do not use deter-
gents or solvents.
Keep the ventilation slots clean and free.
Clean the machine with a soft brush or a damp cloth.
If the nozzle (10) is dirty or blocked, you can re-
move the foreign body from the nozzle with a nozzle
cleaning needle.
5. If the device topples over, switch it off immediately
with the ON/OFF button (14) and disconnect the
device from the mains with the mains connection
cable. There is a risk of electric shock! First return
the device to the upright, standing position. For your
own safety, wait about ve minutes before re-estab-
lishing the electrical connection.
6. Switching off: Press the ON/OFF button (14) again.
The operation LED (15) goes out and the heating
process is ended with the displayed temperature
7. Disconnect the device from the mains. The mains
connection is only required to heat up the water.
Charging the battery (Fig. 5/ 8)
1. The weed killer has an integrated Li-Ion battery for
operation of the water pump.
2. The battery is charged automatically when the week
killer is connected to the mains and the ON/OFF
button is pressed.
3. You can see the charge status of the battery on the
charge status display (18).
Operation (Fig. 1; 5-8)
Important note: Only regular use of the device will
ensure effective weed control. The weeds will only
die off after a certain amount of time has passed
following treatment.
1. Switch on the weed killer with the ON/OFF button
(14). Make sure that the device is disconnected
from the mains.
2. If no settings, etc. are made on the device within
one (1) minute, it automatically switches off.
3. Press the ‘Pump’ button (19) once. The ‘Pump’
LED (20) begins to illuminate and a beep is is-
sued. The charge status display also begins to il-
luminate.
4. Remove the lance (9) from the lance holder (13).
5. Direct the nozzle (10) towards weeds. Attention!
The jet must not be directed towards any per-
sons, animals, active electrical equipment or
the device itself.
6. The width of the water jet can be adjusted by turn-
ing the nozzle (10).
7. Wait a few seconds until the pump has built up
enough pressure.
8. Actuate the activation lever (7). The activation le-
ver (7) can be locked with the locking button (8).
9. Spray weeds for a few seconds with hot water.
The hotter the water, the more quickly the plant
protein is destroyed. Ensure that hot water also
penetrates to the root of the weed. This is the only
way to permanently remove the weed. Make sure
that you bring the nozzle (10) as close as pos-
sible to the weed.
10. The device can be used in the same manner to
water plants with cold water, or for the applica-
tion of fungicides, pesticides, fertilisers or clean-
ing agents that are water-soluble, as well as for
disinfecting and cleaning of dirt and stains with hot
water.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Therbio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Therbio in the language / languages: English, German, Dutch, French, Polish, Finnish as an attachment in your email.

The manual is 3.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info