782034
19
Zoom out
Zoom in
Previous page
1/60
Next page
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58 www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
GB І 19
Only ever plug the machine into an appropriately
installed shockproof socket which is fused with at
least 16 A.
Setup
Warning! Disconnect the plug before all maintenance,
retooling and assembly work on the weed killer.
Place all supplied parts on a at surface. Group the
same parts.
Handle assembly (Fig. 2)
1. Loosely screw the compression ttings (5) on the
designated threads.
2. Firmly attach the handle (6).
3. Tighten the compression tting (5).
Assembly of lance with hose (Fig. 3)
1. Screw the lance (9) together with the hose (25).
Operation
Filling with water (Fig. 4)
1. Remove sealing cap (4) as shown in Fig. 4.
2. Fill a maximum of 20L of water using a suitable
container or funnel. Use pure rainwater or distilled
water, if applicable, because it will not cause calci-
cation.
3. Wipe up spilled water with a dry towel immediately.
4. Fit the sealing cap and tighten as shown in Fig. 4.
Mains connection (Fig. 5)
1. Open the sealing cap of the spray-water-protected
mains plug (3).
2. Connect the mains plug (3) with extension cable
(11) to the mains.
Heating mode (Fig. 6/8)
1. Switching on: Press the ON/OFF button (14) once
- A beep sound is issued. The operation LED (15)
begins to illuminate. The water temperature is dis-
played on the temperature indicator (17). If there
is too little water in the system, the water shortage
warning LED (16) illuminates.
2. If there are leaks in the water system, switch off the
device immediately with the ON/OFF button (14)
and disconnect the device from the mains with the
mains connection cable. There is a risk of electric
shock!
3. Heating the water: Press the heating button (21)
and the water in the tank is heated up. The current
water temperature can be seen on the temperature
indicator (17). Depending on the lling temperature
of the water, it can take up to 45 minutes before the
water has been heated up to maximum tempera-
ture.
4. When the maximum temperature is reached, three
short beeps are issued and the LED for heating
mode (22) goes out.
Check the cable for damage.
Remove the plug from the socket before all work
on the machine, before rest periods and when the
machine is not being used.
Mains cables may not have a smaller cross section
than 2 x1.5 mm².
Charge the batteries only in chargers that have
been recommended by the manufacturer. There is
a risk of re if a charger for a particular type of bat-
tery is used for another type of battery.
Use only the designated type of battery in the pow-
er tool. Use of other batteries can cause injury and
re.
While the battery is not being used, keep it away
from paperclips, coins, keys, nails, screws and oth-
er small metal objects which could bridge the con-
tacts. A short-circuit between the battery contacts
can cause burns or re.
If used incorrectly, liquid may leak from the battery.
Avoid contact with it. In the event of accidental con-
tact, rinse with water. If the liquid gets in your eyes,
also consult your doctor. Leaking battery liquid can
cause skin irritation and burns.
WARNING! RISK OF EXPLOSION! Never try to
charge non-rechargeable batteries.
Warning! This electric tool generates an elec-
tromagnetic eld during operation. This eld can
impair active or passive medical implants under
certain conditions. In order to prevent the risk of
serious or deadly injuries, we recommend that per-
sons with medical implants consult with their physi-
cian and the manufacturer of the medical implant
prior to operating the electric tool.
Technical Data
Rated voltage 220-240V~
Heating operation rated output 3000W
Heating time (full tank) approx.
45min
Shut-off temperature 99°C
Pump delivery rate 0.5 L/min
Rated battery voltage 11.1V
Battery capacity 2000mAH
Battery type Lithium-Ion
Tank contents 20L
Weight 7.6 kg
Before commissioning
The position of the machine must be stable.
Before commissioning, all safety devices must be
installed correctly.
Before connecting the machine, ensure that the
data on the rating plate complies with the mains
data.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Therbio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Therbio in the language / languages: English, German, Dutch, French, Polish, Finnish as an attachment in your email.

The manual is 3.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info