Manual Scheppach Structo 7.0 (page 12 of 42) (English, German, French, Italian, Spanish)

782183

Zoom out

Zoom in

1/42

english 7

Manufacturer:

Scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear client,

We hope you will enjoy your new Scheppach construction

circular saw and wish you success with it.

The manufacturer of this tool is, according to the current

product liability law, not liable for damages caused to or

by this tool because of:

• incorrect usage,

• failure to observe the manual,

• repairs by third parties, not authorized specialists,

• tting and exchange of non-original exchange parts,

• non-intended use,

• failure of the electrical installations because of

inobservance of the electrical Rules and VDE-Regulati-

ons 0100, DIN 57113/VDE0113.

We recommend that you:

Read the entire operating instructions before assembling and

implementing.

This instruction manual should make it easier for you to

get to know your machine and to use its range of applica-

tions as intended. The manual contains important informa-

tion on how to work with the machine in a secure, correct

and efﬁcient way, and how you can avoid risks, save repair

costs, reduce down time and increase the reliability and

life span of the machine. Apart from the security rules

mentioned in these operating instructions, you should

implicitly pay attention to the valid regulations of your

country for the use of the machine. Keep the manual, in a

plastic cover protected against dirt and humidity, with the

machine. They should be read and observed carefully by

every member of staff before starting to work. Only people

instructed on how to use the machine and informed about

the possible risks, should be allowed to use it. The re-

quired minimum age is to be adhered to. Besides the safe-

ty instructions in this manual and the special regulations

of your country the recognized technical rules for the ope-

ration of wood processing machines need to be observed.

General Instructions

• After unpacking please check all parts for possible

damage during transport. In case of complaints the

driver needs to be contacted as soon as possible.

• Complaints coming in later will not be recognized as

such.

• Check if the consignment is complete.

• Familiarize yourself with the machine by means of the

operating instructions before implementing it.

• In case of replacing worn or exchange parts, as for

accessories, only use original Scheppach parts. You can

obtain exchange parts at the specialized dealer.

• Upon ordering, please specify our article nºs as well as

type and year of construction of the tool.

Safety instructions

In these operating instructions we have indicated positions

that concern your safety with this mark.

• Forward the safety instructions to all people working on

or with this machine.

• The machine is only to be used in technically faultless

condition as well as according to its intended use, and

in a safety and risk conscious manner, and with

observance of the operation instructions! Especially

malfunctions that can threaten safety have to be repaired

immediately.

• Pay attention to all safety and risk instructions of the

machine.

• Keep all safety and risk instructions of the machine

completely readable.

• The circular saw should not be used to saw rewood.

• Be careful at work: Danger of damaging nger(s) and

hand(s) by the rotating cutting tool.

• Check power supply lines.

• Do not use defective lines. See “Electrical connection“.

• Please be vigilant the machine is steadfast.

• Please pay attention that the construction circular saw is

steadfast while being assembled.

• Keep children away from the to power supply connected

machine.

• The minimum age for the operating person is 18 years.

• People running the machine should not be distracted.

• Keep the operating site free from wood chips and waste.

• Pay attention to the rolling direction of the motor and

saw blade. See instructions “Electrical connection“

page U5 (wall mounted connector).

• Build in only well sharpened, slit free and non-deformed

saw blades.

• Circular saw blades made out of high-performance steel

should not be built in.

• The security facilities of the machine should not be

dismantled nor be made unusable.

• The slit wedge is an important security facility, which

leads the workpiece and avoids the closing of the joints

behind the saw blade and the reversing of the workpiece.

Please note the thickness of the slit wedge – see the

staved in nºs on the slit wedge. The slit wedge should

not be thinner than the saw blade and not thicker than

its intersection width.

• Put the cover on the workpiece at every operation.

• The cover should be put horizontal above the saw blade

at every operation.

• When cutting lengthwise small workpieces – less than

120 mm – implicitly use the spline end.

• To repair disorders or to pull out jammed pieces of wood,

switch the machine off. Pull out power plug!

• In case of a knocked-out sawing split, renew the inset.

Pull out power plug!

• Modifying as well as adjusting, measuring and cleaning

to be carried out only when motor is switched off. Pull

out power plug!

• Upon leaving the working place, switch off the motor.

Pull out power plug!

• Installations, repairs and maintenance with regards to

the electrical instalIation should only be carried out by

specialists.

• The machine is only intended for industrial use.

• Wear protection gloves when exchanging the saw blade.

• All protection - and safety instructions must be assembled

imediately after ﬁnished repair and maintenance works.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Structo 7.0 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2.62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach Structo 7.0 Manual

Product: