782182
9
Zoom out
Zoom in
Previous page
1/54
Next page
10 english
Check power supply lines. •
Do not use defective lines. See “Electrical connec-•
tion“.
Please be vigilant the machine is steadfast. •
Please pay attention that the construction circular saw •
is steadfast while being assembled.
Keep children away from the to power supply connected •
machine.
The minimum age for the operating person is 18 •
years.
People running the machine should not be distracted. •
Keep the operating site free from wood chips and •
waste.
Pay attention to the rolling direction of the motor and •
saw blade. See instructions “Electrical connection“
page U5 (wall mounted connector).
Build in only well sharpened, slit free and non-de-•
formed saw blades.
Circular saw blades made out of high-performance steel •
should not be built in.
The security facilities of the machine should not be •
dismantled nor be made unusable.
The slit wedge is an important security facility, which •
leads the workpiece and avoids the closing of the joints
behind the saw blade and the reversing of the work-
piece. Please note the thickness of the slit wedge
see the staved in nºs on the slit wedge. The slit wedge
should not be thinner than the saw blade and not thick-
er than its intersection width.
Put the cover on the workpiece at every operation. •
The cover should be put horizontal above the saw blade •
at every operation.
When cutting lengthwise small workpieces – less than •
120 mm – implicitly use the spline end.
To repair disorders or to pull out jammed pieces of •
wood, switch the machine off. Pull out power plug!
In case of a knocked-out sawing split, renew the inset. •
Pull out power plug!
Modifying as well as adjusting, measuring and clean-•
ing to be carried out only when motor is switched off.
Pull out power plug!
Upon leaving the working place, switch off the motor. •
Pull out power plug!
Installations, repairs and maintenance with regards to •
the electrical instalIation should only be carried out
by specialists.
The machine is only intended for industrial use.•
Wear protection gloves when exchanging the saw •
blade.
All protection - and safety instructions must be as-•
sembled imediately after finished repair and mainte-
nance works.
Also upon the slightest position movement separate the •
machine from the external power supply! Upon return
to service, connect the machine to the power supply
according to the rules!
Intended use
The machine complies with the valid EG Machines guide-
line.
The Scheppach construction circular saw should not be •
used in closed rooms.
Only work with ear protection.•
The machine is built according to the electronic level •
and the safety-related rules. Nevertheless, danger for
life and limb of the user or a third party, respectively
damage to the machine and other intrinsic values can
arise during its use.
Use the machine only in technical impeccable condi-•
tion as well as according to its intended use, and in a
safety and danger conscious manner with observance of
the operational constructions! Immediately eliminate,
or have eliminated, in particular those disorders that
can harm the safety!
The Scheppach construction circular saw has been con-•
structed exclusively with tools supplied by Scheppach,
according to EN 847-1 and accessories constructed for
the sawing of wood. Please note that while sawing all
workpieces should be held and led safely.
The maximum workpiece thickness is 125 mm for the •
structo 5WE and 150 mm for the structo 5DR.
Every use surpassing this counts as non-intended use. •
In this case the manufacturer is not liable for dam-
ages caused; therefore the user only bears the conse-
quences.
The safety, work and maintenance regulations of the •
producer as well as the measurments mentioned in the
“Technical information“ must be adhered to.
Attention must be paid to the applicable prevention of •
accidents rules and to the other, generally accepted
safety-related rules.
The Scheppach construction circular saw should only •
be used, maintained or repaired by people who are fa-
miliar with it and informed about the risks. Arbitrary
changes to the machine exclude liability of the manu-
facturar.
The Scheppach construction circular saw should only •
be used with original accessories, original extension
tools and original saw blades of the manufacturer.
According to the currently valid regulations the use •
of this machine is not allowed in closed rooms. The
machine should only be used outside or in sufficiently
ventilated rooms.
Other risks
The machine is built according to the up to date tech-•
nical level and the accepted safety-related rules. How-
ever, some remaining risks might appear during work.
Risk of injury to fingers and hands by the rotating saw •
blade in case of incorrect usage of the workpiece.
Injuries because of the workpiece being slung away •
due to incorrect holding or usage, such as working with-
out end stop.
Risk to health because of wood dust or wood splinters. •
Wear personal protection gear such as eye protection
and dusk mask without fail.
Injuries caused by a defect saw blade. Check the saw •
blade regularly for its integrity.
Electricity danger, in case electrical connections that •
are not according to the rules are used.
Furthermore, despite of all precautions unapparent re-•
maining risk can exist.
Remaining risks can be minimized, when the “Safety •
information” and the ”Intended use” as well as the op-
erational instructions are both respected.
Deactivate the machine and pull out the power plugs •
when you want to clean the machine.
Keep the electrical connections always oil and grease •
free.
The machine has a working area that is in front of the •
machine.
For cleaning always switch off the machine and pull •
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Structo 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Structo 5 in the language / languages: English, German, French, Italian, Polish, Finnish as an attachment in your email.

The manual is 9.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info