782083
15
Zoom out
Zoom in
Previous page
1/100
Next page
15
Proper Use
• The machine meets the requirements of the valid EC
machine directive.
• Beforestartingtowork,all guards and safety devices
must be fitted to the machine.
• Themachinehasbeendesignedtobeoperatedbyone
person. The operator is responsible opposite third par-
ties for all dangers emanating from the machine in the
working area.
• Observeallsafetyinstructionsandwarningsattachedto
the machine.
• Seetoitthatsafetyinstructionsandwarningsattached
to the machine are always complete and perfectly leg-
ible.
• The planer/thicknesser with its tools and accessories
offered has exclusively been designed for the treatment
of wood.
• Whenworkingwith thestandardequipment,thework
pieces must not exceed the table size. Passage width
204 mm, passage height 120 mm.
• Larger work pieces that could tilt from the table top,
require the use of a table length extension or a roller
stand (optional equipment).
• When used in enclosed rooms, the machine must be
connected to a dust extractor unit to remove wood chips
and sawdust. The air flow rate at the suction connector
must be 20 m/s.
• For work in commercial spaces, a dust extractor unit
must be used that meets commercial requirements.
• Neverswitchofforremovedustextractorunitswiththe
main machine running.
• Themachinemustonlybeusedintechnicallyperfect
condition in accordance with its designated use and the
instructions set out in the operating manual. Any func-
tional disorders, especially those affecting the safety
of the machine, should therefore be rectified immedi-
ately.
• Thesafety,workingandmaintenanceinstructionsofthe
manufacturer, as well as the dimensions stated in the
chapter Technical Data, must be observed.
• Relevant accident prevention regulations and other,
generally recognized safety-technical rules must also be
adhered to.
• Themachinemayonlybeused,maintained,andoper-
ated by persons familiar with it and instructed in its
operation and procedures. Arbitrary alterations to the
machine release the manufacturer from all responsibil-
ity for any resulting damage.
• Themachinemayonlybeusedwithoriginalaccessories
and original tools of the manufacturer.
• Attention: The use of other tools or accessories than
stated in the operating instructions, can hold the risk of
injuries.
• Anyotheruseexceedsauthorization.Themanufacturer
is not responsible for any damages resulting from unau-
thorized use; risk is the sole responsibility of the opera-
tor.
Utilisation conforme
La machine est conforme au directive de l’U.E. en vi-
gueur.
• Touslesdispositifsdesécuritéetdeprotectiondoivent
être montés pour le travail.
• La rabogau est conçue pour être maniée par une
seule personne ayant toute la responsabilité.
• Observertouteslesconsignesrelativesàlasécuritéet
au danger figurant sur la machine.
• Veilleràcequetouteslesplaquesd’avertissementre-
latives à la sécurité et au danger appliquées sur la ma-
chine soient toujours complètes et bien lisibles.
• Lerabotetsesoutilsdoiventuniquementêtreutilisés
pour raboter le bois.
• Les dimensions maximales des pièces à travailler ne
doivent pas être plus grandes que la table. Largeur de
passage 204 mm, hauteur de passage 120 mm.
• Avecdespiècesdetravaillertrèsgrandesquipourraient
basculer, il faut employer une rallonge de table ou une
servante (équipements optionnels).
• Silamachineestutiliséedansdeslocauxfermés,elle
doit être reliée à un dispositif d’aspiration. Faire tou-
jours aspirer les copeaux de bois et la sciure. La vitesse
de flux à la buse d’aspiration doit être de 20 m/s.
• Pour l'aspiration lors de travaux relevant du domaine
professionnel, utiliser une dépoussiéreur autorisé à ce
but.
• Nepasarrêterouretirerlesinstallationsd’aspirationou
dépoussiéreurs lors du fonctionnement de la machine-
outil.
• Utiliserlamachineuniquementlorsqu'elleestenparfait
état du point de vue technique et conformément à son
emploi prévu en observant les instructions de service,
en tenant compte de la sécurité et en ayant conscience
du danger. Eliminer notamment (ou faire éliminer) im-
médiatement toute panne susceptible de compromettre
la sécurité.
• Lesconsignesdecurité,detravail,etd’entretiendu
constructeur ainsi que les dimensions qui sont indi-
quées dans les données techniques, doivent être res-
pectées.
• Respecter les consignes de prévention antiaccidents
appropriées, ainsi que les autres règles de sécurité
techniques reconnue en général.
• Utilisation,entretien,miseenconditiondelamachine
uniquement par des personnes familiarisées et qui sont
informées des dangers inhérants. Toute initiative de
modification de la machine exclut la responsabilité du
constructeur pour les dommages y faisant suite.
• Lamachinedoitêtreutilieuniquementavecdesac-
cessoires et des outils d’origine du constructeur.
• Attention:L'utilisationd'autresoutilsetaccessioresque
ceux-ci spécifiés dans le manuel, peut causer des bles-
sures.
• Toutautregenred'utilisationestconsidérécommenon
conforme. Le constructeur n’assume pas de responsa-
bilité en cas de dommages dans ce cas; le risque est à
la charge de l’utilisateur seul.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach SP 85 Spero at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SP 85 Spero in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info