Manual Scheppach SG3400i (page 19 of 120) (English, German, French, Italian)

781618

Zoom out

Zoom in

1/120

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 19

2. Device description (Fig. 1-2)

1. Transport handle

2. Battery compartment cover

3. Earth connection

4. Tank cover

5. Wheels

6. Cover

7. Reverse starter

8. Fuel valve

9. Energy saving switch

10. Start, stop switch

11. Indicator lights

12. Reset button

13. Display button

14. 12 V DC Connection

15. 12 V DC Safety trigger

16. 230 V ~ socket (2x)

17. Digital indicator with light

3. Scope of delivery (Fig. 3)

A Adapter cable with 12V terminals

B Phillips head screwdriver

C Oil lling cylinder

D Remote control

E Spark plug wrench

F Instructions

G SG3400i generator

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available)

• Check that the delivery is complete.

• Check the device and its spare parts for possible

damage caused by transportation. In the event of

complaints, you must contact the distributor without

delay. Claims at a later stage will not be accepted.

• If possible, store the packaging until the warranty

period has expired

• Before handling the device, make yourself familiar

with it by reading the operating instructions.

• For accessories, consumables and spare parts,

only use original parts. Spare parts are available

from your stockist.

• Include our item number, the device model and

year of manufacture in your order.

•

m Attention!

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts!

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

We hope you have a lot of fun and success using your

new machine.

Note:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• improper handling,

• noncompliance of the operating instructions,

• repairs by third parties, not by authorized service

technicians,

• installation and replacement of non-original spare

parts,

• non-intended use,

We recommend:

That you read through the entire operating instruc-

tions before putting the machine into operation.

These operating instructions are to assist you in get-

ting to know your machine and utilize its proper ap-

plications.

The operating instructions contain important notes on

how you work with the machine safely, expertly, and

economically, and how you can avoid hazards, save

repair costs, reduce downtime and increase the reli-

ability and service life of the machine.

In addition to the safety requirements contained in

these operating instructions, you must be careful to

observe your country’s applicable regulations.

The operating instructions must always be near the

machine. Put them in a plastic folder to protect them

from dirt and humidity. They must be read by every

operator before beginning work and observed con-

scientiously. Only persons who have been trained in

the use of the machine and have been informed of

the various dangers may work with the machine. The

required minimum age must be observed.

In addition to the safety requirements in these operat-

ing instructions and your country’s applicable regula-

tions, you should observe the generally recognized

technical rules concerning the operation of identically

constructed devices.

We accept no liability for accidents or damage that

occur due to a failure to observe this manual and the

safety instructions.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SG3400i in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 11.37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach SG3400i Manual

Product: