644519

Scheppach SD1600V Manual

19
Zoom out
Zoom in
Previous page
1/48
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
• Do not cut pieces of material too small to hold by
hand outside the blade guard.
• Avoid awkward hand positions where a sudden slip
could cause a hand to move into the blade.
• Always use the blade guard to avoid possible injury
due to blade breakage.
• Never leave the scroll saw work area with the
power 01), or before the machine has come to a
complete stop.
• Do not perform layout, assembly or set up work
on the table while the cutting tool is in operation.
• Never turn your scroll saw on before clearing
the table of all objects: (tools, scraps of wood,
etc) except for the workpiece and related feed or
support devices for the operation planned.
Remaining hazards
The machine has been built using modern tech-
nology in accor dance with recognized safety
rules. Some remaining hazards, how ever, may
still exist.
• Long hair and loose clothing can be hazardous
when the work piece is rotating. Wear personal
protective gear such as a hair net and tight tting
work clothes.
• Saw dust and wood chips can be hazardous. Wear
per so nal protective gear such as safety goggles
and a dust mask.
• The use of incorrect or damaged mains cables can
lead to injuries caused by electricity.
• Even when all safety measures are taken, some
remaining hazards which are not yet evident may
still be present.
• Remaining hazards can be minimized by following
the instructions in „Safety Precautions“, „Proper
Use“ and in the entire operating manual.
• Do not force the machine unnecessarily: excessive
cutt ing pressure may lead to rapid deterioration of
the blade and a decrease in performance in terms
of nish and cutting precision.
• Avoid accidental starts: do not press the start
button while inserting the plug into the socket.
Keep this safety information in a safe place.
6. Technical data
SD1600f
Extent of delivery
Scroll saw
Operating instructions
Technical data
Dimensions
L x W x H mm
630 x 295 x 370
Bench size mm
ø 255 x 415
Saw blade
length mm
127
Cutting height
max. mm
57
Working depth mm
406
Lifting
movement mm
21
15 Pull the plug out of the outlet
– Never remove loose splinters, chips or
jammed wood pieces from the running saw
blade.
– During non-use of the electric tool or prior to
maintenance and when replacing tools such
as saw blades, bits, milling heads.
16 Do not leave a tool key inserted
– Before switching on, make sure that keys and
adjusting tools are removed.
17 Avoid inadvertent starting
– Make sure that the switch is switched off
when plugging the plug into an outlet.
18 Use extension cables for outdoors
– Only use approved and appropriately identi-
ed extension cables for use outdoors.
– Only use cable reels in the unrolled state.
19 Remain attentive
– Pay attention to what you are doing. Remain
sensible when working. Do not use the elec-
tric tool when you are distracted.
20 Check the electric tool for potential damage
– Protective devices and other parts must be
carefully inspected to ensure that they are
fault-free and function as intended prior to
continued use of the electric tool.
– Check whether the moving parts function
faultlessly and do not jam or whether parts
are damaged. All parts must be correctly
mounted and all conditions must be fullled to
ensure fault-free operation of the electric tool.
– The moving protective hood may not be xed
in the open position.
– Damaged protective devices and parts must
be properly repaired or replaced by a recog-
nised workshop, insofar as nothing different is
specied in the operating manual.
– Damaged switches must be replaced at a
customer service workshop.
– Do not use any faulty or damaged connection
cables.
– Do not use any electric tool on which the
switch cannot be switched on and off.
21 ATTENTION!
– Exercise elevated caution for double mitre
cuts.
22 ATTENTION!
– The use of other insertion tools and other ac-
cessories can entail a risk of injury.
23 Have your electric tool repaired by a qualied
electrician
– This electric tool conforms to the applicable
safety regulations. Repairs may only be per-
formed by an electrician using original spare
parts. Otherwise accidents can occur.
ADDITIONAL SAFETY RULES FOR SCROLL
SAWS
• This scroll saw is intended for use in dry conditions,
and for indoor use only.
19 / 48
FR
IT
DE
GB
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach SD1600V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SD1600V in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info