782191

Scheppach SAC405F Kity Manual

11
Zoom out
Zoom in
Previous page
1/36
Next page
11
ment or cable, keep them away from your work
area.
5 Securely store unused electric tools
–Unused electric tools should be stored in a dry,
elevated or closed location out of the reach of
children.
6 Do not overload your electric tool
–They work better and more safely in the speci-
ed output range.
7 Use the correct electric tool
–Do not use low-output electric tools for heavy
work.
–Do not use the electric tool for purposes for
which it is not intended. For example, do not
use handheld circular saws for the cutting of
branches or logs.
–Do not use the electric tool to cut rewood.
8 Wear suitable clothing
–Do not wear wide clothing or jewellery, which
can become entangled in moving parts.
–When working outdoors, anti-slip footwear is
recommended.
–Tie long hair back in a hair net.
9 Use protective equipment
–Wear protective goggles.
–Wear a mask when carrying out dust-creating
work.
10 Connect the dust extraction device
–If connections for dust extraction and a col-
lecting device are present, make sure that
they are connected and used properly.
–Operation in enclosed areas is only permitted
with a suitable extraction system.
11 Do not use the cable for purposes for which it is
not intended
–Do not use the cable to pull the plug out of
the outlet. Protect the cable from heat, oil and
sharp edges.
12 Secure the workpiece
–Use the clamping devices or a vice to hold the
workpiece in place. In this manner, it is held
more securely than with your hand.
–An additional support is necessary for long
workpieces (table, trestle, etc.) in order to
prevent the machine from tipping over.
–Always press the workpiece rmly against
the working plate and stop in order to prevent
bouncing and twisting of the workpiece.
13 Avoid abnormal posture
–Make sure that you have secure footing and
always maintain your balance.
–Avoid awkward hand positions in which a
sudden slip could cause one or both hands to
come into contact with the saw blade.
14 Take care of your tools
–Keep cutting tools sharp and clean in order to
be able to work better and more safely.
–Follow the instructions for lubrication and for
tool replacement.
–Check the connection cable of the electric tool
–Éviter tout contact du corps avec les pièces
mises à la terre (par exemple, tuyaux, radia-
teurs, fours électriques, appareils de réfrigé-
ration).
4 Tenez les enfants à l‘écart !
–Ne laissez pas d’autres personnes toucher
l’outil ou le câble, éloignez-les de votre poste
de travail.
5 Conserver les outils électriques non utilisés en
sécurité
–Les outils électriques non utilisés doivent être
conservés dans un lieu sec, en hauteur ou
fermé, hors de portée des enfants.
6 Ne pas forcer l‘outil électrique
–Il fonctionne en effet de manière plus satis-
faisante et plus sûre dans sa plage de perfor-
mances.
7 Utiliser le bon outil électrique
–Ne pas utiliser d‘outils électriques de faibles
performances pour réaliser des travaux exi-
geants.
–Ne pas utiliser l‘outil électrique à des ns pour
lesquelles il n‘a pas été prévu. Par exemple,
ne pas utiliser de scie circulaire manuelle pour
découper des poteaux de construction ou des
bûches de bois.
8 Porter des vêtements adaptés
–Ne pas porter de vêtements amples ou de
bijoux qui risqueraient d‘être entraînés par les
pièces mobiles.
–En cas de travail en extérieur, il est recom-
mandé de porter des chaussures antidéra-
pantes.
–Recouvrir les cheveux longs d‘un let.
9 Utiliser des équipements de protection
–Porter des lunettes de protection.
–Si l‘intervention génère de la poussière, porter
un masque respiratoire.
10 Raccorder le dispositif d‘aspiration des pous-
sières
–Si des raccords sont disponibles pour l‘aspi-
ration et la collecte des poussières, veiller à
ce qu‘ils soient raccordés et utilisés correcte-
ment.
–Une utilisation en espace clos n‘est permise
qu‘avec une installation d‘aspiration adaptée.
11 Ne pas utiliser le câble/cordon dans de mau-
vaises conditions
–Ne pas tirer sur le câble pour débrancher le
connecteur de la prise. Protéger le câble de la
chaleur, de l‘huile et des bords coupants.
12 Fixation de la pièce à usiner
–Utiliser des dispositifs de serrage ou un étau
pour maintenir la pièce. Elle sera ainsi main-
tenue de manière plus sûre qu‘à la main.
–Dans le cas de pièces longues, il est néces-
saire d‘utiliser un support supplémentaire
(table, étaux, etc.) an d‘éviter que la machine
ne bascule.
–Appuyer toujours fermement la pièce contre le
plateau de travail et la butée pour éviter que
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach SAC405F Kity at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SAC405F Kity in the language / languages: English, German, French as an attachment in your email.

The manual is 2.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info