782191

Scheppach SAC405F Kity Manual

13
Zoom out
Zoom in
Previous page
1/36
Next page
13
regularly and have it replaced by a recognised
specialist when damaged.
–Check extension cables regularly and replace
them when damaged.
–Keep the handle dry, clean and free of oil and
grease.
15 Pull the plug out of the outlet
–Never remove loose splinters, chips or
jammed wood pieces from the running saw
blade.
–During non-use of the electric tool or prior to
maintenance and when replacing tools such
as saw blades, bits, milling heads.
–When the saw blade is blocked due to abnormal
feed force during cutting, turn the machine off
and disconnect it from power supply. Remove
the work piece and ensure that the saw blade
runs free. Turn the machine on and start new
cutting operation with reduced feed force.
16 Do not leave a tool key inserted
–Before switching on, make sure that keys and
adjusting tools are removed.
17 Avoid inadvertent starting
–Make sure that the switch is switched off
when plugging the plug into an outlet.
18 Use extension cables for outdoors
–Only use approved and appropriately identi-
ed extension cables for use outdoors.
–Only use cable reels in the unrolled state.
19 Remain attentive
–Pay attention to what you are doing. Remain
sensible when working. Do not use the elec-
tric tool when you are distracted.
20 Check the electric tool for potential damage
–Protective devices and other parts must be
carefully inspected to ensure that they are
fault-free and function as intended prior to
continued use of the electric tool.
–Check whether the moving parts function
faultlessly and do not jam or whether parts
are damaged. All parts must be correctly
mounted and all conditions must be fullled to
ensure fault-free operation of the electric tool.
–The moving protective hood may not be xed
in the open position.
–Damaged protective devices and parts must
be properly repaired or replaced by a recog-
nised workshop, insofar as nothing different is
specied in the operating manual.
–Damaged switches must be replaced at a
customer service workshop.
–Do not use any faulty or damaged connection
cables.
–Do not use any electric tool on which the
switch cannot be switched on and off.
21 ATTENTION!
–The use of other insertion tools and other ac-
cessories can entail a risk of injury.
22 Have your electric tool repaired by a qualied
electrician
–This electric tool conforms to the applicable
la pièce ne bouge ou ne se torde.
13 Éviter les positions du corps anormales
–Veiller à adopter une position stable et à tou-
jours maintenir son équilibre.
–Éviter les positions maladroites des mains qui
risqueraient de toucher la lame de la scie en
cas de glissement soudain.
14 Prendre soin de ses outils
–Veiller à ce que les outils de découpe de-
meurent acérés et propres an d‘assurer un
fonctionnement plus efcace et plus sûr.
–Respecter les consignes de graissage et de
remplacement des outils.
–Contrôler régulièrement la conduite de
raccordement de l‘outil électrique et le faire
remplacer par un spécialiste agréé en cas de
dommage.
–Contrôler régulièrement les rallonges et les
remplacer en cas de dommage.
–Veiller à ce que les poignées soient sèches,
propres et exemptes d‘huile et de graisse.
15 Tirer directement sur le connecteur pour le
débrancher de la prise
–En cas de non-utilisation de l‘outil électrique,
avant une opération de maintenance et lors
du remplacement des outils, par exemple,
lame de scie, foret, fraise.
–Lorsque la lame de scie se bloque en raison
d’une pression anormale ou trop forte exercée
par l’utilisateur lors de la coupe, éteignez la
machine et débranchez-la du secteur. Retirez la
pièce en cours de sciage et veillez à ce que la
lame de scie oscille librement une fois dégagée.
Mettez la machine en marche et recommencez
la coupe en exerçant une pression réduite.
16 Retirer les clés de réglages
–Avant toute mise en service, veiller à ce que
les clés et outils de réglages aient été retirés.
17 Éviter une mise en marche involontaire
–S‘assurer lors du branchement de la che
dans la prise que l‘interrupteur est éteint.
18 Utiliser la rallonge pour l‘extérieur
–En extérieur, utiliser uniquement des ral-
longes autorisées et indiquées comme étant
conformes à cet emploi.
–N‘utiliser les tambours de câbles que
lorsqu‘ils sont déroulés.
19 Être attentif
–Faire attention à ce que l‘on fait. Procéder
de manière raisonnable. Ne pas utiliser l‘outil
électrique lorsque l‘on et pas concentré.
20 Vérier si l‘outil électrique présente des dom-
mages
–Avant de poursuivre l‘utilisation de l‘outil élec-
trique, il convient de vérier soigneusement
que les dispositifs de protection et les autres
pièces fonctionnent parfaitement et conformé-
ment aux dispositions.
–Vérier que les pièces mobiles fonctionnent
parfaitement, ne sont pas coincées et ne sont
pas endommagées. Toutes les pièces doivent
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach SAC405F Kity at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SAC405F Kity in the language / languages: English, German, French as an attachment in your email.

The manual is 2.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info