781416
18
Zoom out
Zoom in
Previous page
1/160
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
18 | GB
e) Maintain electric tools and insertion tools
with care. Check whether moving parts func-
tion properly and do not get stuck and wheth-
er parts are broken or are damaged and thus
adversely affect the electric tool function.
Have damaged parts repaired before using
the electric tool.
Many accidents are caused by poorly maintained
electric tools.
f) Always keep cutting tools sharp and clean.
Carefully maintained cutting tools with sharp cut-
ting edges seize up less often and are easier to
guide.
g) Use electric tools, insertion tools, etc. ac-
cording to these instructions. Take the work-
ing conditions and the activity to be carried
out into consideration.
Using electric tools for applications other than the
intended uses can lead to dangerous situations.
h) Keep the handles and gripping surfaces dry,
clean and free of oil and grease.
Slippery handles and gripping surfaces prevent
safe operation and control of the electrical tool in
unforeseen situations.
5. Service
a) Only have your electric tool repaired by qual-
ied specialists and only with original spare
parts.
This ensures that safety of the electric tool is
maintained.
Behaviour in an emergency
In case of an accident, initiate the necessary rst aid
measures and seek medical assistance as quickly as
possible.
When you are requesting help, give the following
information:
1. Location of accident
2. Type of accident
3. Number of injured people
4. Type of injuries
5. Who is reporting
6. Additional safety instructions
Make sure the sifter stands rmly on solid ground.
Protect long hair with a cap or a net.
Before doing any repair work, switch off the motor
and pull the power supply plug.
Installation, repair and maintenance work at the
electrical system may only be done by a specialist.
As soon as the repair and maintenance work has
been nished, all guards and safety devices must
be retted.
When working with the sifter, all safety devices and
guards must be tted.
c) Avoid unintentional startup. Make sure that
the electric tool is switched off before you
connect it to the power supply and/or battery,
pick it up or carry it.
Keeping your nger on the switch when you
carry the electric tool or having the electric tool
switched on when you connect it to the power
supply may result in accidents.
d) Remove the setting tools or spanners before
switching on the electric tool.
A tool or spanner that is located in a rotating part
of the electric tool may result in injuries.
e) Avoid abnormal posture. Make sure that you
have secure footing and always maintain
your balance.
This will allow you to better control the electric
tool in unexpected situations.
f) Wear suitable clothing. Do not wear wide
clothing or jewellery. Keep hair and clothing
away from moving parts.
Loose clothing, jewellery and long hair can be
caught by moving parts.
g) If dust extraction and collection devices can
be mounted, these must be connected and
used properly.
Using a dust extraction unit can reduce hazards
caused by dust.
h) Do not allow yourself to be lulled into a false
sense of security and do not ignore the safe-
ty rules for electric tools, even when you
have used it many times and have become
familiar with it.
Careless actions can result in serious injuries
within a fraction of a second.
4. Using and handling the electric tool
a) Do not overload the electric tool. Use the
electric tool intended for the work.
The suitable electric tool allows you to work bet-
ter and more safely in the indicated power range.
b) Do not use an electric tool whose switch is
defective.
An electric tool that cannot be switched on or off
is dangerous and must be repaired.
c) Remove the plug from the socket and/or take
out a removable battery before setting the
device, changing insertion tool parts or put-
ting the electric tool away.
These precautions will prevent the electric tool
from starting unintentionally.
d) Keep unused electric tools out of the reach
of children. Do not let people use the electric
tool who are not familiar with it or who have
not read these instructions.
Electric tools are dangerous if they are used by
inexperienced people.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach RS400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach RS400 in the language / languages: All languages as an attachment in your email.

The manual is 6.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scheppach RS400

Scheppach RS400 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info