782076

Scheppach PT85 Woodster Manual

21
Zoom out
Zoom in
Previous page
1/156
Next page
21
Putting into operation
Dust extraction:
When used in enclosed rooms, the machine must be con-
nected to a dust extractor unit.
Connecting the dust extractor for surface planing:
• Lift the arm G of the cutter block guard in order to free
the mortises (Fig. 6).
• On both sides of the suction connector, pull out the
switching pins I (Fig. 7).
• Set the thicknessing table to the lowest position and
push the suction connector into the machine until both
switching pins I can slide into the mortises H (Fig. 8).
Connecting the dust extractor for thicknessing (Fig. 9)
• Remove the ripping fence.
• Push the cutter block guard back and fix the suction
connector.
• The suction connector is fitted in such a way that both
switching pins are in line with the mortises. Then push
the switching pins into the mortises.
For an optimum dust extraction, the air flow rate must be
20 m/s at a minimum.
Mise en service
Aspiration de poussière:
Si la machine est utilisée dans des locaux fermés, elle doit
être reliée à un dispositif d’aspiration.
Raccord de l’aspiration pour le dégauchissage:
• Relever le bras G de la protection de l'arbre de rabotage
pour dégager les trous oblongs (Fig. 6).
• Sur les deux côtés de la buse d’aspiration F, retirer les
boulons commutateurs I (Fig. 7).
• Mettre la table à la position la plus basse et pousser la
buse d’aspiration dans la machine jusqu’au point où les
deux boulons commutateurs I se laissent pousser dans
les trous oblongs (Fig. 8).
Raccord de l’aspiration pour le rabotage (Fig. 9)
• Enlever la butée de rabotage.
• Pousser la protection de l'arbre de rabotage en arrière et
fixer la buse d’aspiration.
• Monter la buse d'aspiration de telle manière que
les deux boulons commutateurs s’alignent aux trous
oblongs. Ensuite, pousser les boulons dans les trous.
Pour une aspiration parfaite, la minimum vitesse de flux
à la buse d’aspiration doit être de 20 m/s.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach PT85 Woodster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach PT85 Woodster in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info