Manual Scheppach PT85 Woodster (page 13 of 156) (English, German, Dutch, Danish, French, Italian, Polish, Spanish, Norwegian, Finnish)

782076

Zoom out

Zoom in

1/156

and pull the power plug.

• Use a dust extractor unit for eliminating wood chips

or sawdust . The air ﬂow rate at the suction connector

must be 20 m/s.

• Do not use any planer/thicknesser blades showing

cracks or having changed their shape.

• Use suitable supports when handling heavy or bulky

work pieces, for instance roller stands (optional equip-

ment).

• Cut off the external power supply of the machine even

if only minor changes of place are envisaged. Properly

reconnect the machine to the supply mains before re-

commissioning.

• When leaving the work place, switch the motor off. Pull

the power supply plug.

• Pull the power supply plug when the machine is not in

use.

• Before every use, check the machine for any defective

switches, plugs, electric cables and defective or miss-

ing guards. Only switch on the machine if all parts are

in perfect working order.

• Only use well sharpened planing knives. Blunt blades

increase the risk of backlash.

• Always match the planer/thicknesser block protector to

the work piece width. The unused part of the knife block

must be covered.

• Use a feed stick for short work pieces.

• When planing narrow work pieces, use additional sup-

ports like, for instance, horizontal pressure devices or

spring-loaded guards.

• Do not use the machine for rebating and dovetailing.

• Check the function of backlash and the cutter block

regularly.

• During operation, the machine should be ﬁxed to the

ground by bolts.

• Regularly check the ﬁrm seat of the planer/thicknesser

blades and blade support on the knife shaft.

• The blades must not protrude beyond the knife shaft by

more than 1 mm + 10 %.

• The machine must be earthed safely. The yellow/green

(green) lead is the earth conductor.

• Regularly check the good function of the backlash safe-

ty device.

• Never remove more chips than 2 mm.

• The minimum height of regrindable planer/thicknesser

knives is 20 mm.

• Pour pallier à une cause de dérangement, arrêter la ma-

chine, débrancher la prise.

• Utiliser un système d’aspiration pour aspirer les co-

peaux ou la sciure. La vitesse de circulation d’air doit

être de 20 m/s au manchon de prise d’air.

• Remplacer immédiatement les fers de rabot defectueux

(ﬁssures, distorsions ou défauts semblables).

• Pour le rabotage de pièces lourdes et peu maniables,

utiliser des supports comme, par exemple, des servan-

tes (équipement optionnel).

• Même pour des changements de place peu impor-

tants, séparer la machine de toute alimentation en

énergie venant de l’extérieur. Avant la remise en

service, rebrancher la machine sur le réseau.

• Lorsque l'on s'éloigne de l’emplacement de travail, arrê-

ter le moteur et débrancher la prise.

• Débrancher la prise quand la machine n’est pas utili-

sée.

• Avant chaque utilisation, vériﬁer le bon état des dispo-

sitifs protecteurs et de l’interrupteur. Utiliser la machine

uniquement si les dispositifs protecteurs, l’interrupteur,

la ﬁche, le câble et toutes les autres pièces sont en

parfait état.

• Ne travailler qu'avec des fers de rabot bien affûtés. Des

fers de rabot émoussés augmentent le risque de contre-

coup.

• Toujours adapter le dispositif de protection de l'arbre de

rabot à la largeur de la pièce à travailler. La partie non

utilisée de l’arbre doit être recouverte.

• Pour le rabotage de pièces courtes, utiliser un guide

d’avance pour pièce courte.

• Pour le rabotage de pièces de bois étroites, utiliser des

aides comme, par exemple, presseur horizontal ou pro-

tecteur à ressort.

• Ne pas utiliser la machine pour entailler en queue

d'aronde.

• Vériﬁer régulièrement la bonne fonction du protecteur

contrecoup et de l’arbre de rabotage.

• Lors du travail, la machine doit être ﬁxée au sol avec

des boulons.

• Sur l'arbre de rabotage, vériﬁer régulièrement le siège

ferme des fers de rabot et leur supports.

• Les fers de rabot ne doivent pas saillir au-dessus de

l'arbre portelames par plus d'un (1) mm + 10 %.

• La machine doit être mise à terre de manière sûre. Le

conducteur jaune-vert (vert) est la terre.

• Vériﬁer régulièrement l’efﬁcacité du dispositif anti-con-

trecoup.

• Jamais raboter plus profond que 2 mm.

• La hauteur minimum de fers de rabot affûtables est de

20 mm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach PT85 Woodster in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5.98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach PT85 Woodster Manual

Product: