782078

Scheppach PT 106 Woodster Manual

27
Zoom out
Zoom in
Previous page
1/116
Next page
27
Resin from aluminium tools may only be removed with •
cleaning liquids not being aggressive to this type of
metal.
Attention:
In case of a bad condition of the electrical system, the
performance can drop for a short period of time. Ask a
specialist.
m Electrical connections
The electric motor installed is completely wired ready
for operation.
The connection meets the requirements of the German
standards VDE and DIN.
The connection to the electric power supply to be ef-
fected by the customer as well as the extension cable
must also meet these requirements.
Connection and repair work on the electrical installation
may be carried out by a qualified electrician only.
Important hints:
The electric motor has been design for operating mode
S6 / 40 %.
Defective electrical connection cables:
Electrical connection cables often suffer insulation dam-
age. Possible causes are:
Pinch points when connection cables are run through •
window or door gaps.
Kinks resulting from incorrect attachment or laying of •
the connection cable.
Cuts resulting from running over the connecting •
cable.
Insulation damage resulting from forcefully pulling out •
of the wall socket.
Cracks through aging of insulation.•
Such defective electrical connection cables must not be
used as the insulation damage makes them extremely
hazardous.
Check electrical connection cables regularly for dam-
age. Make sure the cable is disconnected from the mains
when checking.
Electrical connection cables must comply with the regu-
lations VDE and DIN. Only use cables marked "HO 7
RNF". This is a binding regulation.
Single-phase motor, Fig. 12
The voltage of the power supply must be 230 V / 50 •
Hz.
Extension cables up to a length of 25 m must have a •
cross-section of 1.5 mm², and beyond 25 m at least
2.5 mm².
The connection to the mains must be protected with a •
16 A slow-acting fuse.
In the event of enquiries please specify the following
data:
Type of current of the motor•
un agent de commerce approprié pendant 24 heures.
Les outils en aluminium doivent être traités uniquement
avec un agent liquide, doux à ce type de métal.
Attention:
Avec une mauvaise condition du réseau électrique, la
puissance peut décliner pendant peu de temps. Consulter
un électricien.
m Branchement électrique
Le moteur électrique installé est raccordé en ordre de
marche. Le raccord correspond aux normes allemandes
VDE et DIN en vigueur.
Le raccordement électrique que doit effectuer le client
ainsi que les câbles de rallonge utilisés doivent aussi
correspondre à ces normes.
Les branchements et réparations de l’équipement élec-
trique ne doivent être effectués que par un spécialiste
de l’électricité.
Avis importants:
Le moteur électrique a été construit pour le mode d’em-
ploi S6 / 40 %.
Câbles de branchement électrique défectueux:
Il arrive fréquemment que l’isolation des câbles de bran-
chement électrique présente des avaries. Les causes en
sont:
Ecrasements, si le câble passe sous la porte ou la •
fenêtre.
Coudes dûs à une mauvaise fixation ou un mauvais •
guidage du câble de branchement.
Coupures dues à un écrasement du câble.•
Extractions violentes du câble de la prise murale.•
Fissures due au vieillissement de l'isolation.•
Il est déconseillé d’utiliser des câbles électriques qui
présentent ces types d’avaries. Danger de mort.
Vérifier régulièrement les câbles de branchement électri-
que. Veiller à ce que le câble n’entre pas en contact avec
la tension de secteur pendant la vérification.
Les câbles de branchement électrique doivent corres-
pondre aux normes VDE et DIN en vigueur. Utiliser des
câbles marqués «HO 7 RNF».
Moteur monophasé, Fig. 12
La tension du secteur doit être de 230 V / 50 Hz.•
Les câbles de rallonge d’une longueur maximale de 25 •
m doivent présenter une section transversale de 1,5
mm², ceux d’une longueur supérieure à 25 m doivent
présenter une section transversale de 2,5 mm².
Le branchement au réseau est équipé d’un fusible à •
action retardée de 16 A.
En cas de questions suppplémentaires, veuillez fournir
des indications suivantes:
Nature du courant du moteur•
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach PT 106 Woodster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach PT 106 Woodster in the language / languages: English, German, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 5.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info