Manual Scheppach PRECISA 6.0 (page 16 of 80) (English, German, Dutch, French, Finnish)

781489

Zoom out

Zoom in

1/80

16 english

Manufacturer:

Scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

General notes

• After unpacking, check all park for any transport

darnage. lnforrn the supplier irnmediately of any faults.

• Later complaints cannot be considered.

• Make Sure the delivery is cornplete.

• Before putting into operation, familiarize yourself with

the rnachine by carefully reading these instructions.

• Use only original scheppach accessories, wearing or

replacement parts. You can ﬁnd replacement parts at your

scheppach dealer.

• When ordering, include our item number and the type and

year of construction of the machine.

Note

In accordance with valid product liability laws, the

manufacturer of this device shall not be responsible for

damage to and frorn this device which results frorn:

• lrnproper care.

• Noncompliance with the Operating Instructions.

• Repairs rnade by unauthorized persons.

• The installation and use of any parts which are not

original scheppach replacernent parts.

• lrnproper use and application.

• Failure of the electrical systern as a result of non-

compliance with the legal and applicable electrical

directives and VDE regulations 01 00, DIN 571 13 I

VDE 01 13.

We recornrnend

that you read through the entire operating instructions

before putting into operation.

These operating instructions are to assist you in getting to

know your rnachine and utilize its proper applications.

The operating instructions contain important notes on

how you work with the rnachine safely, expertly,

and econornically, and how you can avoid hazards, save

repair costs, reduce downtirne and increase the reliability

and service life of the machine.

In addition to the safety requirements contained in these

operating instructions, you rnust be careful to observe

your country‘s applicable regulations

The operating instructions must always be near the

machine. Put thern in a plastic folder to protect thern

frorn dirt and humidity. They rnust be read by every

operator before beginning work and observed

conscientiously. Only persons who have been trai- ned in

the use of the machine and have been infor- rned of the

various dangers may work with the rnachine. The required

minimurn age rnust be observed.

In addition to the safety requirernents contained in these

operating instructions and your country‘s applicable

regulations, you should observe the generally recognized

technical rules concerning the operation of woodworking

machines.

Contents

Seite

General notes 16

Safety notes 16

Use only as authorized 17

Rernaining hazards 18

Scope of delivery / Accessories 18

Technical data 19

Mounting 21

Setting into operation 25

Maintenance 28

Electrical connection 28

Malfunction Rernedies 71

Working area 68

EC declaration of conforrnity 78

Spare parts list 73

Guarantee 79

Safety notes

• In these operating instructions we have marked the

places that have to do with your safety with this sign.

• Please pass on safety notes and instructions to all those

who work on the machine.

• The machine has been built in accordance with state-of-

the-art standards and the recognized safety rules.

Nevertheless, its use may constitue a risk to life and

limb of the User or of third parties, or cause damage to

the machine and to other material property.

• Only tools which conform to European standard EN 847-1

may be used.

• Observe all safety instructions and warnings attached to

the machine.

• See to it that safety instructions and warnings attached

to the machine are always complete and perfectly

legible.

• The bench circular saw may not be used to cut ﬁre wood.

• Caution when working: There is a danger to ﬁngers and

hands from the rotating cutting tool.

• Check all power supply lines. Do not use defective lines.

• lnsure that the saw bench is Set up in a stable position

on ﬁrm ground.

• Keep children away from the machine when it is

connected to the power supply.

• Operating personal must be at least 18 years of age.

Trainees must be at least 16 years of age, but may only

operate the machine under adult supervision.

• Persons working on the machine may not be diverted

from their work.

• The working space on the machine must be free of chips

and wood scrap.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach PRECISA 6.0 in the language / languages: English, German, Dutch, French, Finnish as an attachment in your email.

The manual is 7.7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach PRECISA 6.0 Manual

Product: