782583
19
Zoom out
Zoom in
Previous page
1/40
Next page
english 19
Sound intensity level
IdlingLWA=96,8dB(A)
WorkingLWA=102,5dB(A)
WorkplacebasedemissionvaluesindB
IdlingLpAeq=85,2dB(A)
WorkingLAe=91,2dB(A)
A measurement error factor of K = 4 dB applies to the
stated emission values.
In these operating instructions we have marked the places
that have to do with your safety with this sign.
Safety notes
• Pleasepassonsafetynotesandinstructionstoathose
whoworkonthemachine.
• Themachinehasbeenbuiltinaccordancewithstate-of-
the-artstandardsandtherecognizedsafetyrules.Nev-
ertheless, its use may constitue é risk to life and limb
of the user or of third parties, or cause damage to the
machine and to other material property.
• OnlytoolswhichconformtoEuropeanstandardEN847-
1 may be used.
• Observeallsafetyinstructionsandwarningsattachedto
the machine.
• Seetoitthatsafetyinstructionsandwarningsattached
tothemachinearealwayscompleteancperfectlylegible.
• Thebenchcircularsawmaynotbeusedtocutrewood.
• Cautionwhenworking:Thereisadangertongersand
hands from the rotating cutting tool.
• Checkallpowersupplylines.Donotusedefectivlines.
• Insurethatthesawbenchissetupinastableposition
on firm ground.
• Keepchildrenaway fromthemachine whenit is con-
nectedtothepowersupply.
• Operating personal must be at least 18 years of age.
Trainees must be at least 16 years of age, but may only
operate the machine under adult supervisIon.
• Persons working on the machine may not be diverted
fromtheirwork.
• Theworkingspaceonthemachinemustbefreeofchips
andwoodscrap.
• Ifasecondpersonisatthecircularsawbenchtoremove
cutworkpieces,themachinemustbeequippedwitha
table extension. The second per. son may only stand at
the removal end of the table extension.
Fitonlysharp,crack-freeandundistortedcirculalsawblades.
• Circular saw blades made of super-high-speed steel
must not be used.
• Safetydevicesonthemachinemustnotbedismantled
or put out of action.
• ThesplittingwedgeisanimportantsafetyfeatureThe
workpieceisfedthroughthesplittingwedgewhichpre-
ventsthecutfromclosingbehindthesawbladeandalso
preventstheworkpiecefromkickingback.
• Alwayslowertheprotectivecoverovertheworkpiecefor
each operation.
• Thecowlmuststandhorizontallyabovethesawblade
duringallworkingprocedures.
• Alwaysusethepush-stickforlongitudinalcuttingofnar-
rowworkpiecesoflessthan120mm.
• Alwaysstopthemachineanddisconnectthemainsplug
beforeremedyingfaultsorremovingjammedpiecesofwood.
• Replacetheblade-slotinsertifitisdamaged.Discon-
nectthemainsplug!
• Wearonlyclose-ttingclothes.Removerings,bracelets
andotherjewelry.
• Payattentiontotherotationaldirectionofthemotorand
tool-seeElectricalConnection.
• Thesafetymechanismsonthemachinemaynotbere-
moved or rendered unusable.
• Cleaning,changing,calibrating,andsettingofthema-
chinemayonlybecarriedoutwhenthemotorisswitched
ofFig.Pullthepowersupplyplugandwaitfortherotat-
ing tool to completely stop.
• Switchthemachineoffandpullpowersupplyplugwhen
rectifying any malfunctions.
Forallworkingproceduresthemachinemustbeconnected
to a Dust extractor. Observe instructions for proper use.
• Whenworking onthe machine, all safety mechanisms
and covers must be mounted.
Circularsawbladesmadefromsuperspeedsteelmaynotbeused.
• Thesplittingwedgeisanimportantsafetyfeature.The
workpieceisfedthroughthesplittingwedge,whichpre-
ventsthecutfromclosingbehindthesawbladeandalso
preventstheworkpiecefromkickingback.
• Notethethicknessofthesplittingwedge-seegures
stamped into the splitting wedge. The splitting wedge
maynotbethinnerthanthesawbladeandnotthicker
thancuttingjointwidth.
• Beforethemachineisputintooperationitmustbecon-
nectedtoadustextractorwithaexible,non-ammable
suction hose. The suction should switch on automati-
callywhenthemachineisswitchedon.
• Whenleavingtheworkplace,switchthemotoroff.Pull
thepowersupplyplug.
• Cutofftheexternalpowersupplyofthemachineorplant
evenifonlyminorchangesofplaceareenvisaged.Prop-
erly reconnect the machine to the supply mains before
recommissioning.
• Connectionandrepairworkontheelectricalinstallation
maybecarriedoutbyaqualiedelectricianonly.
• Allprotectionandsafetydevicesmustbereplacedafter
completing repair and maintenance procedures.
•Operatingconditions:Donotusethemachineoutsideonly
inside in closed rooms
•Storeconditions:humidityshouldnotbeunder90%and
not condensed
•Safebigworkpiecesofcanting
Use only as authorized
• ThemachinecorrespondstothevalidECguideline.
• The circular sawbench is dened as a semi-stationary
machineinaccordancewithprEN1870-1.
• Fortransportingthemachinewithintheworkshoparea
usethewheelassembly(accessory).Theworkingposi-
tion is to the front of the machine either to the right or
theleftsawblade.
• Themachiningrangeandsurroundingareasofthema-
chine must be clear of interfering foreign matter to pre-
vent accidents occurring.
• Workpiecesmustbecompletelyfreeofforeignobjects,
i.e.nailsorscrews.
• Beforethemachineisputintooperationitmustbecon-
nectedtoadustextractorwithaexible,non-ammable
suctionhose.Thesuctionshouldswitchonautomatically
whenthemachineisswitchedon.
• Whenusedinenclosedrooms,themachinemustbecon-
nected to a vacuum exhaust unit.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Precisa 3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Precisa 3.0 in the language / languages: English, German, French as an attachment in your email.

The manual is 8.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info