Manual Scheppach Plana 4.0 C (page 12 of 36) (English, German, French)

782088

Zoom out

Zoom in

1/36

Manufacturer:

Scheppach Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Str. 69

D-89335 Ichenhausen

Valued customer,

We hope that you enjoy your new machine and wish you

every success in working with it.

Warning:

The manufacturer of these devices is not liable, under the

applicable Product Liability Act, for damages to this device

or by this device resulting from:

• improper handling,

• noncompliance with the operating instructions,

• repairs by a third, non-authorized party

• installation and replacement of non-original spare

parts,

• utilization, noncompliant with the regulations,

• failure of the electric equipment resulting from violation

of the electric speciﬁcations and VDE (Association of

Electrotechnology) regulations 0100, DIN 57113 / VDE

0113.

We advise you:

Before assembly and implementation, please read the op-

erating instructions in their entirety.

These operating instructions should make it easier for you

to get acquainted with your machine and to use it as in-

tended.

The operating instructions contain important indications

that will help you work professionally and efﬁciently with

the machine, at the same time avoiding risks, saving on re-

pair costs, decreasing downtime and increasing reliability

and lifespan of the machine.

In addition to the safety regulations provided in the operat-

ing instructions, you must observe the applicable regula-

tions of your country for the use of this machine.

You should keep the operating instructions near the ma-

chine. They are protected from dirt and moisture by a plas-

tic covering. These must be read and followed diligently

by any operator, before staring the work. Only those, who

have been instructed on the use and informed of all the

associated risks, should work on the machine. Minimum

age requirements should be observed.

General Considerations

• After unpacking, please check all of the parts for any

possible damages in transit. The feeder must be imme-

diately notiﬁed of any complaints. Late claims will not

be accepted.

• Check that the shipment is complete.

• Before use, familiarize yourself with the operating in-

structions.

• Please use only original parts as supplies, such as wear

and tear and replacement parts. You can obtain replace-

ment parts from your specialized dealer.

• When ordering, please give our item number, as well as

the type and the year of manufacture of the device.

Plana 3.0c and Plana 4.0c

Scope of delivery

Thicknesser-Planer Plana 3.0c

and Plana 4.0c

Plane shaft guard

Combined extraction outlet

Assembly supplies (supply bag)

Adjustable planer fence

Operating instructions

Caractéristiques

techniques Plana 3.0c Plana 4.0c

Dimensions L x W x

H mm 1085x610x950 1610x700x950

Table height mm 805 825

Planer table L x l mm 1085x255 1610x320

Thicknessing table L x

l mm 600x248 750x308

Weight kg 147 345

Planer schaft

Planer schaft ø mm 75 95

Knife range ø mm 77 99

Speed max. 1/min 4000 4000

Number of blades 3 4

Type of Knives HSS planing knives

Feeder

Number of feed

cylinders 2 2

Feeder cylinder ø mm 32 42

Lenght mm 365 460

Feeding speed m/min 8 8

Detachable Oui Oui

Motor

Motor V/Hz 230/50 400/50 230/50 400/50

Receiving capacity

P1 W 2000 2200 2200 2200

Delivering capacity

P2 W 1500 1700 1700 1700

Speed 1/min 2800 2800 2800 2800

Operating mode S1 S1 S1 S1

Work data

Planer work width max.

mm 250 310

Chip work planer max.

mm en dégau 5 5

Thicknesser work

planer max. mm 247 306

Chip work thicknesser

max. mm 2 5

Aperture thickness

min/max. mm 5/180 8/220

Stopper angle 90–45° 90-45°

Stopper lenght mm 700 1100

Stopper height mm 130 130

Subject to technical changes!

Sound characteristics

In accordance with EN 23746 for sound power level, as

well as EN 31202 (correction factor k3 calculated ac-

cording to Appendix A.2 of EN 31204) for the calculation

of the sound pressure level at the workstation, the sound

10 english

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Plana 4.0 C in the language / languages: English, German, French as an attachment in your email.

The manual is 5.39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach Plana 4.0 C Manual

Product: