Manual Scheppach OX 3-1000 (page 11 of 41) (English, German, Dutch, Danish, French, Italian)

781958

Zoom out

Zoom in

1/41

english 11

• Injuries by the work piece being catapulted out of ma-

chine due to improper clamping or guidance.

• Electrical hazard due to use of improper power cords.

• Furthermore there might be non-obvious remaining

risks despite all precautions.

• Residual risks can be reduced if safety instructions,

intended use, as well as all operating instructions are

observed.

• Danger due to particular characteristics of wood

(branches, irregular shapes, etc.).

Components, Fig. 1

1 Switch/outlet

2 Electrical motor

3 Steel frame

4 Splitting column

5 Hoisting adjustment bar

6 Splitting wedge

7 On/off lever for splitting wedge

8 Grip protection

9 Rubber stopper

10 Fixed splitting table

11 Lower pivoting table

12 Upper pivoting table

13 Locking hooks

14 Quick mounting wedge

15 Wheels for brief transport

16 Transportation handles

17 Hydraulic oil tank

Transport

Transport with a fork lift truck:

For shipment, the machine is ﬁxed to a pallet by steel

bands. It is protected by a plastic sheet cover.

At least two persons are required to lift it off the pallet.

Tilt it carefully to the side with the wheels and let it glide

off the pallet.

Attention: The log splitter has a high centre of gravity -

danger of tipping over!

Transportation by Hand

In order to move the wood splitter, splitting knife 9 must

be pushed all the way down. The splitter must be tipped

slightly to the splitting column with the transport han-

dles, until the machine inclines to the wheels and can

be moved.

Transport with a crane

Pull through 2 ropes crosswise under the frame and lift

carefully.

Attention: Never lift the machine at the splitting knife!

Storage conditions:

Maintain the following storage conditions:

- dry, sheltered storage location

- maximum humidity 80%

- temperature range -20°C … +60 °C

The machine should be operated under the following con-

ditions:

minimum maximum recommended

temperature 5 C° 40 C° 16 C°

humidity 95 % 70 %

Setting-up

Prepare the location, where the machine will stand. Clear

enough space to ensure safe and trouble-free working.

The machine is designed for operation on level surfaces

and must stand stably on a level, solid underground.

Assembly

Packaging considerations have dictated that your wood

splitter is not completely assembled upon delivery.

Assembling the operating arm, Fig. 2

Place operating arm A in the lateral connection C, and

tighten the hexagon screw D, with the disc and the safety

bolt. The safety bolt should only be tightened to the point

where the operating arm can still be moved.

Function Test

Before every use you should conduct a function test.

Action: Result:

Pressing both handles down. The splitting knife moves

down - as far as approx. 5 cm

above the table.

Releasing either handle. The splitting knife stays in its

position.

Releasing both handles. The splitting knife moves

back into top position.

Operating Instructions

Travel limit

• Move the splitting knife into the desired position.

• Release one control lever,

• Switch motor off,

• Release second control lever,

• Move the travel adjustment bar up until it is under

tension and fasten it with the tommy screw.

• Switch motor on, and

• Check upper position.

Splitting

• Place the wood on the table and hold it down with the

two handles. Push the handles down. Once the split-

ting knife enters the wood, push the handles outward

and with an equal amount of pressure downward. This

prevents the pressure from being placed on the hold-

ing arms.

• Only split squarely cut logs.

• Split logs in upright position.

• Never in horizontal position or across.

• Wear appropriate gloves while splitting logs.

Attention: When operating the machine the pivoting table

must always be in the locked position!

Pivoting table for short pieces of wood up to 60 cm, Fig. 3.1

In order to split wood, both of the pivoting tables must be

in the operating position and locked.

Pivoting table for wood up to 96,5 cm, Fig. 3.2

In order to split wood of this length, the lower pivoting

table must be in the operating position and locked.

Table for long pieces of wood up to 104/133 cm, Fig. 3.3

In order to split wood of this length, both pivoting tables

must be swung outward.

OX 3-1000 2011.indd 11 07.11.11 12:03

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach OX 3-1000 in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 8.61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach OX 3-1000 Manual

Product: