782264
22
Zoom out
Zoom in
Previous page
1/136
Next page
22
Placethelubricationcartridgeintotheopeningin
the lubrication device.
Turntheplasticknobonthelubricationdeviceto
set the rate at which the lubricant is dispensed.
10. Maintenance and care
Pull the mains plug out of the socket and allow
the saw to cool down before starting any assem-
bly,modicationandservicingwork.Thiswill
prevent the saw being started by accident.
Useadampclothtocleantheplasticparts.Do
not use cleaning products, solvents or sharp
objects.
Clear the ventilation openings and moving parts
fromdepositsofdustatregularintervalsusinga
soft brush or paintbrush.
Resinandothersubstancesthataccumulateon
thesidesofthesawbladescancausetheblade
to overheat which can make the blade bend or
even crack. You should therefore always clean the
sawbladeswithgreatcare.Neverscrapethesaw
blade clean using hard objects. Remove these
residuesusingspecialresinremovalproducts,hot
waterorkerosene.Neverusepetroltoremove
these residues.
After you have cleaned the saw blade or when
thesawisnotinuse,thebladesshouldbetreated
with an anti-corrosion product.
Storethesawinadryplace.
We do not recommend that you use this saw
tocutglassbreproducts,plasterboard,lling
compound or plastic for lengthy periods of time
as a result of the high friction caused by these
products.Ifyouneverthelesshavetocutthese
products,werecommendthatyoustopatregular
intervalsandcleanthemachinewithajetofcom-
pressed air.
Alwayswearsafetygoggleswithsideprotection
or sealed goggles and a dust protection mask
whenusingajetofairtocleandustdepositso
the saw.
Thebearingsinthissawarelubricatedforthe
entire service life of the saw. No other lubrication
is required.
The use of an extension cable may result in a
slight loss of power. To prevent this loss of power
and excessive heat generation in the extension
cable, you must use a cable with a suciently
large cross-section.
Guarantee
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Multi Cut 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Multi Cut 5 in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 2.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info