Manual Scheppach MT-P120Li (page 13 of 64) (English, German, Dutch, French, Swedish, Norwegian)

782593

Zoom out

Zoom in

1/64

Remaining risks m

Even if you use this electric power tool

in accordance with instructions, certain

residual risks cannot be rules out. The

following hazards may arise in connection

with the equipment´s construction and

layout:

1. Lung damage if no suitable protective dust

mask is used.

2. Damage to hearing if no suitable ear protec-

tion is used.

3. Health damage caused by hand-arm

vibrations if the equipment is used over a

prolonged period

Equipment Fig.1

1. ON/OFF switch

1. Tool chuck

2. Battery

3. Speed controller

4. Tool

Before starting the equipment

Fitting the plug-in tools

• To t the plug-in tools safely you should

hold the multifunction tool so that the ON/

OFF switch (Fig.1.Pos.1) points down

and the tool mounting (Fig.1.Pos.2) faces

up.

• Place the plug-in tool (e.g. the triangu-

lar sanding/grinding plant) on the tool

mounting (Fig.1.Pos.2) so that the pins of

the tool mounting (Fig.1.Pos.2) t into the

recesses in the plug-in tool.

• Secure the plug-in tool using the supplied

screw and tighten the screw securely with

the Allen key.

• Make sure that the washer is used for the

screw.

• Check that the plug-in tool is secure.

Starting up

Switching on/off

Slide the switch (Fig.1.Pos.1) forwards to

switch on the equipment.

Practical tips

• Switch on the equipment.

• Work away from the body.

• Never move your hands into the direct

vicinity of the work area.

• Use only plug-in tools which are in good

working order and undamaged.

Plug-in tools

Sawing: Sawing wood and plastic. Notes on

working practice: When sawing, watch out

for foreign bodies in the material and remove

them if necessary. Plunge cutting is allowed

only in soft materials such as wood or plaster-

board.

Sanding/grinding: Surface sanding/grinding

at edges, in corners or hard-to-reach areas.

Depending on choice of sanding/grinding

paper for the sanding/grinding of wood, paint,

lacquer, etc. Notes on working practice: This

equipment offers particularly high performance

for the sanding/grinding of hard-to-reach

corners and edges. To sand/grind proles

and channels you can also work with just the

tip or the edge of the sanding/grinding disk.

Various sanding/grinding papers are availa-

ble, specially designed for the different types

of material you may be working on and the

amount you wish to remove from the surface.

The amount removed will depend largely on

the choice of sanding/grinding paper and pres-

sure applied to the sanding/grinding disk.

Scraping: Scraping off old paint or adhesives.

Notes on working practice: Move the plug-in

tool against the area you want to remove.

Begin with a at angle of incidence and little

pressure. The surface (e.g. wood, plaster) may

be damaged if too much pressure is used.

Diamond saw blade: For small repairs to tiled

areas indoors and to brick walls. Notes on

working practice: Work only at high oscillating

speed.

Speed control

You can select the speed by turning the speed

controller (Fig.1.Pos.4).

Cleaning

Always pull out the power plug before star-

ting any cleaning work.

• Keep all safety devices, air vents and the

motor housing free of dirt and dust as far

as possible. Wipe the equipment with a

clean cloth or blow it down with com-

pressed air at low pressure.

• We recommend that you clean the equip-

ment immediately after you use it.

• Clean the equipment regularly with a

damp cloth and some soft soap. Do not

use cleaning agents or solvents; these

may be aggressive to the plastic parts in

the equipment. Ensure that no water can

get into the interior of the equipment.

Storage

•

Store the equipment and accessories out of

children’s reach in a dark and dry place at

above freezing temperature. The ideal storage

temperature is between 5 and 30 °C. Store the

electric tool in its original packaging.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach MT-P120Li in the language / languages: English, German, Dutch, French, Swedish, Norwegian as an attachment in your email.

The manual is 4.73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach MT-P120Li Manual

Product: