Manual Scheppach MT-P120Li (page 11 of 64) (English, German, Dutch, French, Swedish, Norwegian)

782593

Zoom out

Zoom in

1/64

General safety notes m

m CAUTION:

Read all safety regulations and instruc-

tions.

Any failures made in following the safety

regulations and instructions may result in an

electric shock, re and/or serious injury.

Keep all safety regulations and instructions in

a safe place for future use.

The term “electric tool” used in the safety ins-

tructions refers to electric tools operated from

the mains power supply (with a power cable)

and to battery operated electric tools (without

a power cable).

1. Workplace safety

• Keep your work area clean and well illu-

minated. Untidy or unlit work areas can

result in accidents.

• Do not operate the electric tool in an

environment where there is a risk of ex-

plosions and where there are inamma-

ble liquids, gases or dust. Electric tools

produce sparks which could set the dust

or vapours alight.

• Keep the electric tool out of the reach of

children and other persons. If there is a

distraction, you may lose control of the

appliance.

2. Electrical safety

• The connector plug from this electric tool

must t into the socket. The plug should

never be altered in any way. Never use

adapter plugs together with earthed elec-

tric tools. Unaltered plugs and correct

sockets reduce the risk of an electric

shock.

• Avoid bodily contact with earthed

surfaces such as pipes, heating, ovens

and fridges. The risk of electric shock is

increased if your body is earthed.

• Keep the tool out of the rain and away

from moisture. The ingress of water into

an electric tool increases the risk of an

electric shock.

• Do not use the cable to carry the electric

tool, to hang it up or to pull it out of the

socket. Keep the cable away from heat,

oil, sharp edges and moving parts of the

appliance. Damaged or entangled cables

increase the risk of an electric shock.

• If you are working outdoors with an elec-

tric tool, only use extension cables which

are designed specically for this purpose.

Using specially designed outdoor exten-

sion cables, the risk of electric shock is

reduced.

• If operation of the electric tool in a damp

environment can not be avoided, use a

earthleakage circuit-breaker. The earth-

leakage circuit-breaker reduces the risk of

an electric shock.

3. Safety of persons

• Be careful, watch what you are doing

and use an electric tool sensibly. Do not

use the tool if you are tired or under the

inuence of drugs, alcohol or medication.

A moment of inattention when using the

electric tool can result in serious injuries.

• Wear personal protection equipment and

always wear safety goggles. Wearing

personal protection (such as dust masks,

non-slip safety shoes, safety helmet or

ear protection, depending upon the type

and use of the electric tool) reduces the

risk of injury.

• Make sure that the appliance cannot start

up accidentally. Ensure that the electric

tool is switched off before you connect

it to the power supply and/or insert the

battery, or pick up or carry the tool. If

your nger is on the switch whilst carrying

the electric tool or if you connect the ap-

pliance to the mains when it is switched

on, this can lead to accidents.

• Remove keys and wrenches before swit-

ching on the electric tool. A tool or key

which comes into contact with rotating

parts of the appliance can lead to injuries.

• Avoid abnormal working postures. Make

sure you stand squarely and keep your

balance at all times. In this way, you can

control the electric tool better in unexpec-

ted circumstances.

• Wear suitable work clothes. Do not wear

loose clothing or jewellery. Keep hair, clo-

thes and gloves away from moving parts.

Loose clothing, jewellery or long hair can

get trapped in moving parts.

• If vacuuming devices and draining de-

vices can be tted, make sure that these

are correctly attached and correctly used.

The use of a dust extraction system can

reduce the danger posed by dust.

4. Usage and treatment of the electric tool

• Do not overload the appliance. Use the

correct tool for your work. You will be

able to work better and more safely within

the given performance boundaries.

• Do not use an electric tool with a defecti-

ve switch. An electric tool that cannot be

switched on or off is dangerous and must

be repaired.

• Pull the plug out of the socket and/or

remove the battery before making any

adjustments to the appliance, changing

accessories or put the appliance down.

This safety measure prevents starting the

electric tool unintentionally.

• Keep unused electric tools out of the

reach of children. Do not allow people

who are not familiar with the appliance

or who have not read these instructions

to use the appliance. Electric tools are

dangerous if they are used by inexperi-

enced people.

• Clean your electric tool carefully. Check

whether moving parts are functioning

properly and not jamming, whether parts

are broken or damaged enough that the

functioning of this electric tool is affected.

Have damaged parts repaired before

using the appliance. Many accidents are

caused by badly maintained electric tools.

• Keep your cutting tools sharp and clean.

Carefully maintained cutting tools with

sharp cutting edges will jam less and are

easier to control.

• Make sure to use electric tools, accesso-

ries, attachments, etc. in accordance with

these instructions. Take the conditions

in your work area and the job in hand

into account. Using electric tools for any

purpose other than the one for which

they are intended can lead to dangerous

situations.

5. Using and handling the cordless tool

• Ensure that the tool is switched off before

you insert the battery. Inserting a battery

into an electric tool that is switched on

can cause accidents.

• Only charge the batteries in chargers that

are recommended by the manufacturer.

A charger that is designed for a certain

type of battery may pose a re risk if it is

used with other types of battery.

• Use only the correct batteries in the elec-

tric tools. The use of other batteries may

result in injuries and a re risk.

• Keep unused batteries away from paper

clips, coins, keys, nails, screws and other

metallic objects that could cause a short

circuit between the contacts. A short

circuit between the battery contacts may

cause burns or a re.

• In case of incorrect use, uid may escape

from the battery. Avoid contact with it. If

you touch it by accident, rinse the affec-

ted area with water. If you get the uid

in your eyes, also seek medical advice.

Leaking battery uid can cause skin irrita-

tion or burns.

6. Service

• Have your electric tool repaired only by

trained personnel using only genuine spa-

re parts. This will ensure that your electric

tool remains safe to use.

Additional safety instructions

We pay a great deal of attention to the design

of every battery pack to ensure that we supply

you with batteries which feature maximum

power density, durability and safety. The bat-

tery cells have a wide range of safety devices.

Each individual cell is initially formatted and its

electrical characteristic curves are recorded.

These data are then used exclusively to be

able to assemble the best possible battery

packs.

Despite all the safety precautions, caution

must always be exercised when handling bat-

teries. The following points must be obeyed at

all times to ensure safe use. Safe use can only

be guaranteed if undamaged cells are used.

Incorrect handling can cause cell damage.

Important: Analyses conrm that incorrect

use and poor care are the main causes of

the damage caused by high performance

batteries.

Information about the battery

1. The battery pack supplied with your cord-

less tool is not charged. The battery pack

has to be charged before you use the tool

for the rst time.

2. For optimum battery performance avoid

low discharge cycles. Charge the battery

pack frequently.

3. Store the battery pack in a cool place,

ideally at 15°C and charged to at least

40%.

4. Lithium-ion batteries are subject to a

natural ageing process. The battery pack

must be replaced at the latest when its

capacity falls to just 80% of its capacity

when new. Weakened cells in an aged

battery pack are no longer capable of

meeting the high power requirements and

therefore pose a safety risk.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach MT-P120Li in the language / languages: English, German, Dutch, French, Swedish, Norwegian as an attachment in your email.

The manual is 4.73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach MT-P120Li Manual

Product: