782513
74
Zoom out
Zoom in
Previous page
1/84
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
74 | GB
8.11 Using the laser (g. 18)
Switching on:
Press the ON/OFF switch laser (33) 1x. A laser line is projected onto the
material to be processed, providing an exact guide.
Switching o󰀨:
Press the ON/OFF switch laser (33) 1x.
8.12 Adjusting the laser (g. 1920)
If the laser (32) ceases to indicate the correct cutting line, you can read-
just the laser. To do so, open the screws (32b) and remove the front cover
(32a). Loosen the Phillips head screws (E) and set the laser by moving
sideways until the laser beam strikes the teeth of the saw blade (6).
After adjusting and tightening the laser, mount the front cover by tighten-
ing both screws (32b) by hand.
9. Transport
Tighten the locking handle (11) to lock the rotary table.
Press the machine head (4) downwards and secure with the locking
bolt (23).
Fix the saw’s drag function with the locking screw for drag guide (20)
in rear position.
Carry the equipment by the xed saw table (15).
When reassembling the equipment, proceed as described in chapter 8.
10. Maintenance
m Warning! Prior to any adjustment, maintenance or service work dis-
connect the mains power plug!
General maintenance measures
Wipe chips and dust o󰀨 the machine from time to time using a cloth.
In order to extend the service life of the tool, oil the rotary parts once
monthly. Do not oil the motor.
When cleaning the plastic do not use corrosive products.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach MST216 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach MST216 in the language / languages: English, German as an attachment in your email.

The manual is 5.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info