782513
73
Zoom out
Zoom in
Previous page
1/84
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 73
Swing the machine head (4) upwards and lock with the locking bolt
(23).
Loosen the retaining screw (5a) of the cover using a Phillips screw-
driver.
WARNING! Do not fully remove this screw.
Fold the saw blade guard (5) upwards until the saw blade guard (5) is
above the ange screw (28).
With one hand insert the Allen key (C) in the ange screw (29).
Hold the Allen key (C) and slowly close the saw blade guard (5) until it
touches the Allen key (C).
Firmly press the saw shaft lock (30) and slowly rotate the ange screw
(28) in clockwise direction. The saw shaft lock (30) engages after no
more than one rotation.
Now, using a little more force, slacken the ange screw (29) in the
clockwise direction.
Turn the ange screw (28) right out and remove the outer ange (29).
Take the blade (6) o󰀨 the inner ange (31) and pull out downwards.
Carefully clean the ange screw (28), outer ange (29) and inner ange
(31).
Fit and fasten the new saw blade (6) in reverse order.
Attention! The cutting angle of the teeth, in other words the direction
of rotation of the saw blade (6) must coincide with the direction of the
arrow on the housing.
Before continuing your work make sure that all safety devices are in
good working condition.
Attention! Every time that you change the saw blade (6), check to see
that it spins freely in the table insert (10) in both perpendicular and 45°
angle settings.
Attention! The work to change and align the saw blade (6) must be
carried out correctly.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach MST216 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach MST216 in the language / languages: English, German as an attachment in your email.

The manual is 5.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info