782513
67
Zoom out
Zoom in
Previous page
1/84
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 67
8. Attachment and operation
8.1 Attaching the sliding compound mitre saw (g. 1/2/4/5/23)
In order to adjust the rotary table (14), fold the locking handle (11) up-
wards and pull up the latched position lever (35) with your index nger.
Turn the rotary table (14) and pointer (12) to the desired angle meas-
urement of the scale (13). To x the setting, fold the locking handle (11)
downwards.
Pressing the machine head (4) lightly downwards and removing the
locking bolt (23) from the motor bracket at the same time disengages
the saw from the lowest position.
Swing the machine head (4) up.
It is possible to secure the clamping devices (7) to the left or right on
the xed saw table (15). Insert the clamping devices (7) in the holes on
the rear side of the stop rail (16) and secure it with the star grip screws
(7a).
For 0°- 45° mitre cuts, the clamping device (7) must only be mounted
on the right side (see g. 11-12).
It is possible to tilt the machine head (4) a max. 45° to the left by loos-
ening the set screw (22).
Workpiece supports (8) must always be secured and used during
work. Set the desired table size by loosening the set screw (9). Then
tighten the set screw (9) again.
8.2 Precision adjustment of the stop for crosscut 90° (g. 1/2/5/6)
No stop angle included.
Lower the machine head (4) and secure it using the locking bolt (23).
Loosen the set screw (22).
Position the angle stop (A) between the saw blade (6) and the rotary
table (14).
Loosen the lock nut (26a).
Adjust the adjusting screw (26) until the angle between the saw blade
(6) and rotary table (14) is 90°.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach MST216 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach MST216 in the language / languages: English, German as an attachment in your email.

The manual is 5.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info