782513
61
Zoom out
Zoom in
Previous page
1/84
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 61
s) Hold the handle rmly when making an incomplete cut or when
releasing the switch before the saw head is completely in the
down position. The braking action of the saw may cause the saw
head to be suddenly pulled downward, causing a risk of injury.
Safety Instructions for the handling of saw blades
1 Do not use damaged or deformed saw blades.
2 Do not use any insertion tools with cracks. Sort out cracked insertion
tools. Repairs are not permitted.
3 Do not use saw blades made of high speed steel.
4 Check the condition of the saw blades before using the multifunction
sliding cross cut mitre saw.
5 Make sure that a suitable saw blade for the material to be cut is
selected.
6 Only use saw blades recommended by the manufacturer.
Saw blades designed to cut wood and similar materials must comply
with EN 847-1.
7 Do not use saw blades made of high-speed alloy steel (HSS steel).
8 Only use saw blades for which the maximum permissible speed is not
lower than the maximum spindle speed of the multifunction sliding
cross cut mitre saw and which are suitable for the material to be cut.
9 Observe the saw blade direction of rotation.
10 Only insertion the saw blade if you have mastered their use.
11 Observe the maximum speed. The maximum speed specied on
the insertion tool may not be exceeded. If specied, observe the
speed range.
12 Clean grease, oil and water o󰀨 of the clamping surfaces.
13 Do not use any loose reducing rings or bushes for the reducing of
holes on saw blades.
14 Make sure that xed reducer rings for securing the insertion tool
have the same diameter and have at least 1/3 of the cutting diameter.
15 Make sure that xed reducer rings are parallel to each other.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach MST216 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach MST216 in the language / languages: English, German as an attachment in your email.

The manual is 5.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info