Manual Scheppach MS161-46 (page 22 of 108) (English, German, French, Polish)

781692

Zoom out

Zoom in

1/108

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

22 | GB

6 In addition to the safety requirements in these

operating instructions and your country’s applica-

ble regulations, you should observe the generally

recognized technical rules concerning the opera-

tion of identical constructed machines.

7 We accept no liability for damage or accidents

which arise due to non-observance of these in-

structions and the safety information.

2. Layout

1. Handle

2. Drive lever

3. Engine brake lever

4. Upper push bar, 4a lower push bar

5. Quick-release lever

6. Petrol tank

7. Air lter

8. Side discharge

9. Wheel

10. Spark plug

11. Exhaust

12. Dip stick

13. Drive wheel

14. Wheel height adjustment

15. Discharge ap

16. Grass box

17. Pull starter

18. cable clips

19. Mulch insert

20. -

21. Primer button

3. Scope of delivery

Fig. 1 (1 - 20 / a - e)

a) 2 x round head screw M8

b) 2 x washer big

c) 4 x washer small

d) 4 x plastic star grip nut

e) 1 x manual

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available)

• Check that the delivery is complete.

• Check the device and its spare parts for possible

damage caused by transportation. In the event of

complaints, you must contact the distributor without

delay. Claims at a later stage will not be accepted.

• If possible, store the packaging until the warranty

period has expired

• Before handling the device, make yourself familiar

with it by reading the operating instructions.

• For accessories, consumables and spare parts,

only use original parts. Spare parts are available

from your stockist.

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

We hope your new tool brings you much enjoyment

and success.

Note:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

We recommend:

1 Read through the complete text in the operating

instructions before installing and commissioning

the device.

2 The operating instructions are intended to help

the user to become familiar with the machine and

take advantage of its application possibilities in

accordance with the recommendations..

3 The operating instructions contain important in-

formation on how to operate the machine safely,

professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and

how to increase reliability and service life of the

machine.

4 In addition to the safety regulations in the operat-

ing instructions, you have to meet the applicable

regulations that apply for the operation of the ma-

chine in your country.

5 Keep the operating instructions package with the

machine at all times and store it in a plastic cover

to protect it from dirt and moisture. Read the in-

struction manual each time before operating the

machine and carefully follow its information. The

machine can only be operated by persons who

were instructed concerning the operation of the

machine and who are informed about the asso-

ciated dangers. The minimum age requirement

must be complied with.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach MS161-46 in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 7.65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach MS161-46 Manual

Product: