781932
19
Zoom out
Zoom in
Previous page
1/83
Next page
19
Maintenance and Repair
Carry out refitting, setting and cleaning work only when
the motor is switched off. Pull the power plug.
An experienced worker can carry out minor repairs on the
machine alone.
Repair and maintenance work on the electrical system
may only be carried out by a qualified electrician.
All protective and safety devices must be reattached im-
mediately after completed repair and maintenance work.
We recommend:
• Thesplittingwedgeisawearingpartthatneedstobe
sharpened or replaced after wear.
• Thecombinedgrippingandcontrollingdevicemustre-
main smooth running. Lubricate with a few dropsof oil
when necessary.
• Keepsplittingwedgedrivecleanofdirt,woodshavings,
bark, etc.
• Lubricatesliderailswithgrease.EC Declaration of
Conformity
EC Declaration of Conformity
We herewith declare, Woodster GmbH, Günzburger Str. 69, D-89335
Ichenhausen that the machine described below due to its con struc-
tion and design and in the version delivered by us complies with the
relevant provisions of the following EC Directives.
In case of a modification of the machine this declara tion ceases to
be valid.
Documentation Officer: Werner Hartmann (Head of technical inno-
vation)
Machine description: Hydraulic log splitter for splitting wood
Machine type: lh 52
Applicable EC Directives:
EC machine directive 2006/42/EG,
EC Low voltage directive 2006/95/EWG,
EC-EMV directive 2004/108/EWG.
Applied harmonized European standards
Angewandte harmonisierte europäische Normen:
EN 60204-1:2007; EN 60335-1:2007;
EN 609-1:1999 + A1:2004 + A2:2009;
EN 55014-1:2010; EN 55014-2:2009;
EN 61000-3-2:2010; EN 61000-3-3:2009;
Notified body within the meaning of Annex VII
Intertek Deutschland GmbH
Nikolaus-Otto-Str. 13
70771 Leinfelden-Echterdingen
Engaged for: GS-certificate
Place, date: Ichenhausen, 07.07.2010
Signature: On behalf of T. Honigmann
Managing director
Maintenance et réparation
Le moteur doit toujours être à l’arrêt pour effectuer des
travaux de changement d’outillage, de réglage, de mesure
et de nettoyage. Débrancher la fiche secteur.
Seuls des électriciens ont le droit d’effectuer des travaux
de réparation et de maintenance sur l’installation élec-
trique.
Tous les dispositifs de protection et de sécurité doivent
être remontés immédiatement après achèvement des tra-
vaux de réparation et de maintenance.
Conseils:
• Lalameàfendreestunepièced’usuredevantéventuel-
lement être réaffûtée.
• Ledispositifprotecteurcombinéàdeuxmainsdoittou-
jours être aisément manoeuvrable. Le lubrifier de temps
en temps avec quelques gouttes d’huile.
• Lasurfaced’appuidoittoujoursêtrepropre.
• Lubrierlesglissièresavecdelagraisse.Déclaration
de conformité CE
Déclaration de conformité CE
Par la présente nous déclarons, Woodster GmbH, Günzburger Str.
69, D-89335 Ichenhausen, que la machine décrite ci-dessous
correspond, dû à sa construction ainsi que dans la version mise en
vente, aux dispositions correspondantes des directives CE figurant
ci-dessous.
Cette déclaration perd sa validité en cas de modification effectuée
sur la machine.
Chargé de la documentation: Werner Hartmann (Head of technical
innovation)
Machine Fendeur de buches
Type: lh 52
Lignes directrices CE en vigueur:
Directive CE sur les machines 2006/42/EG,
Directive CE sur la sous-tension 2006/95/EWG,
Directive CE-EMV 2004/108/EWG.
Normes européennes harmonisées appliquées:
EN 60204-1:2007; EN 60335-1:2007;
EN 609-1:1999 + A1:2004 + A2:2009;
EN 55014-1:2010; EN 55014-2:2009;
EN 61000-3-2:2010; EN 61000-3-3:2009;
L’organisme notifié confortément à l’annex VII:
Intertek Deutschland GmbH
Nikolaus-Otto-Str. 13
70771 Leinfelden-Echterdingen
Mise sous tension
pourlecontrôle GS-certificate
d’échantillon CE:
Lieu, date: Ichenhausen, 07.07.2010
Signature: ppa T. Honigmann
Directeur
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach LH52 Woodster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach LH52 Woodster in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 3.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info