Keep sufficient distance from the
rotating saw blade during operation
n these operating instructions we have marked the places
that have to do with your safety with this sign: DD Safety notes
who work on the machine.
condition in accordance with its designated use and the
instructions set out in the operating manual, and only
by safety-conscious persons who are fully aware of the
risks involved in operating the machine. Any functional
disorders, especially those affecting the safety of the
machine, should therefore be rectified immediately.
847-1, may be used.
the machine.
to the machine are always complete and perfectly leg-
ible.
lines.
-
nected to the power supply.
Trainees must be at least 16 years of age, but may only
operate the machine under adult supervision .
from their work.
and wood scrap.
and other jewelry.
see Electrical Connection.
-
moved or rendered unusable.
machine may only be carried out when the motor is
switched off. Pull the power supply plug and wait for
the rotating tool to completely stop.
when rectifying any malfunctions.
and covers must be mounted.
blades.
of wood which have become jammed. Disconnect the
mains plug.
when rectifying any malfunctions.
Disconnect the mains plug!
the power supply plug.
plant even if only minor changes of place are envisaged.
Properly reconnect the machine to the supply mains be-
fore recommissioning.
may be carried out by a qualified electrician only.
completing repair and maintenance procedures.
explosion exists.
electric cooker, cooling devices).
elevated or locked away in order to keep them out of
the reach of children.
socket. Protect the cable from heat, oil and sharp edg-
es.
grease.
the plug to the mains socket.
approved extension cords.
cannot be turned on and off.
speed is higher than the maximum permissible speed
of the spindle of the firewood chop saw, and which are
suitable for the material to be cut.
Accessories
Only purchase accessories from your authorised special-
ised dealer. D Use only as authorized
The machine corresponds to the valid EC guideline.
-
ing stand and is only to be used in outdoor locations.
only applicable to cross cut firewood with a feeding
rocker according to the technical specifications.
-
wood.
piece is to be put on the rocker.
ensure they are kept complete and in a legible condi-
tion.
-
chine must be clear of interfering foreign matter to
prevent accidents occurring.
i.e. nails or screws.
machining of wood and materials similar to wood. Only
