Manual Scheppach LBH2600P (page 28 of 60) (English, German, Dutch, French)

781388

Zoom out

Zoom in

1/60

28 GB

• Quickly tug on the starter cord to remove excess

oil from the combustion chamber.

• Clean the spark plug and check that the electrode

gap is correct, or insert a new spark plug with the

correct electrode gap.

• Prepare the equipment for operation.

11. Disposal and recycling

The equipment is supplied in packaging to prevent it

from being damaged in transit. The raw materials in

this packaging can be reused or recycled. The equip-

ment and its accessories are made of various types

of material, such as metal and plastic. Defective

components must be disposed of as special waste.

Ask your dealer or your local council.

Important hint in case of sending the equipment

to a service station:

Due to security reasons please see to it that the

equipment is sent back free of oil and gas!

Ordering replacement parts

Please quote the following data when ordering re-

placement parts:

• Type of machine

• Article number of the machine

Service information

Please note that the following parts of this product

are subject to normal or natural wear and that the

following parts are therefore also required for use

as consumables.

Wear parts*

• Spark plug

• Air lter

• Fuel lter

• Collection bag

* Not necessarily included in the scope of delivery!

10. Storage

Important: Never put the equipment into storage for

longer than 30 days without carrying out the follow-

ing steps.

Storing the equipment

If you intend to store the equipment for longer than 30

days, the equipment must be prepared accordingly.

Otherwise the fuel still remaining in the carburetor

will evaporate and leave a rubbery sediment. This

can cause problems when starting up the equipment

and may require expensive repairs.

• Slowly remove the fuel tank cap to release any

pressure that may have formed in the tank. Care-

fully empty the tank. Empty the tank only outdoors

or in well-ventilated areas. Make sure that no fuel

enters soil (environmental Protection). Use suit-

able base.

• To remove the fuel from the carburetor, start the

engine and let it run until the equipment stops.

• Leave the engine to cool (approx. 5 minutes).

• Remove the spark plug (see section Change and

clean the spark plug).

• Add one teaspoon of 2-stroke engine oil into the

combustion chamber. Slowly pull the starter cord

several times to apply a layer of oil to all internal

components. Fit the spark plug again.

Note: Store the equipment in a dry place and far

away from possible ignition sources such as an oven,

a gas-red hot water boiler, a gas-red dryer, etc.

Putting the equipment back into operation

• Remove the spark plug (see section Change and

clean the spark plug).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach LBH2600P in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach LBH2600P Manual

Product: