782502

Scheppach KZS1500 Primaster Manual

25
Zoom out
Zoom in
Previous page
1/52
Next page
GB | 25
Maintain the electric tool and tool attach-
ments regularly and if necessary, initiate
repairs in order to reduce noise.
–Report faults on the electric tool, protective
devices or the tool attachment to the person
responsible for safety as soon as they are
discovered.
3 Safe work
- Make sure that a suitable saw blade for the
material to be cut is selected.
- Never use the machine to cut other materials
as specied.
- To transport the machine follow the procedure
of point 9.
When transporting the electric tool, only use
the transport devices. Never use the protective
devices for handling or transport.
- Operate the machine only if the protective
devices are functional, in good condition and in
the correct position.
- The oor around the machine must be level,
clean and free of loose particles, such as chips
and cutting residues.
- Only use saw blades for which the maximum
permissible speed is not lower than the maxi-
mum spindle speed of the machine and which
are suitable for the material to be cut.
- Be sure to only use spacers and spindle rings
specied by the manufacturer as suitable for
the intended purpose.
- Attention! Do not replace the laser by a di󰀨er-
ent type.
Repairs may only be carried out by the manu-
facturer or an authorized representative.
- Do not remove any cutting residues or other
parts of workpieces from the cutting zone while
the machine is running and the saw unit is not
at rest.
Warning! This electric tool generates an electro-
magnetic eld during operation. This eld can impair
active or passive medical implants under certain
conditions. In order to prevent the risk of serious or
deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.
Safety instructions for the handling of saw
blades
1 Only use insertion tools if you have mastered their
use.
2 Observe the maximum speed. The maximum
speed specied on the insertion tool may not
be exceeded. If specied, observe the speed
range.
–Do not use any electric tool on which the
switch cannot be switched on and o󰀨.
21 ATTENTION!
–Exercise elevated caution for double mitre
cuts.
22 ATTENTION!
–The use of other insertion tools and other
accessories can entail a risk of injury.
23 Have your electric tool repaired by a qualied
electrician
–This electric tool conforms to the applicable
safety regulations. Repairs may only be per-
formed by an electrician using original spare
parts. Otherwise accidents can occur.
Additional safety instructions
1 Safety precautions
–Warning! Do not use damaged or deformed
saw blades.
–Replace a worn table insert.
–Only use saw blades recommended by the
manufacturer which conform to EN 847-1.
–Make sure that a suitable saw blade for the
material to be cut is selected.
–Wear suitable personal protective equipment.
This includes:
–Hearing protection to avoid the risk of
becoming hearing impaired,
–Respiratory protection to avoid the risk of
inhaling harmful dust,
–Wear gloves when handling saw blades
and rough materials. Carry saw blades in a
container whenever practical.
–Wear goggles. Sparks generated during
work or splinters, chippings and dust
coming from the device can lead to loss of
eyesight.
–Connect a dust collecting device to the elec-
tric tool when sawing wood. The emission
of dust is inuenced, among other things,
by the type of material to be processed, the
signicance of local separation (collection or
source) and the correct setting of the hood/
guide plates/guides.
–Do not use saw blades made of high-speed
alloy steel (HSS steel).
2 Maintenance and repair
–Pull out the mains plug for any adjustment or
repair tasks.
–The generation of noise is inuenced by
various factors, including the characteristics
of saw blades, condition of saw blade and
electric tool. Use saw blades which were
designed for reduced noise development,
insofar as possible.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach KZS1500 Primaster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KZS1500 Primaster in the language / languages: English, German, French as an attachment in your email.

The manual is 5.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info