782502

Scheppach KZS1500 Primaster Manual

24
Zoom out
Zoom in
Previous page
1/52
Next page
24 | GB
–Follow the instructions for lubrication and for
tool replacement.
–Check the connection cable of the electric
tool regularly and have it replaced by a rec-
ognised specialist when damaged.
–Check extension cables regularly and replace
them when damaged.
–Keep the handle dry, clean and free of oil and
grease.
15 Pull the plug out of the outlet
–Never remove loose splinters, chips or
jammed wood pieces from the running saw
blade.
–During non-use of the electric tool or prior to
maintenance and when replacing tools such
as saw blades, bits, milling heads.
–When the saw blade is blocked due to abnor-
mal feed force during cutting, turn the ma-
chine o󰀨 and disconnect it from power supply.
Remove the work piece and ensure that the
saw blade runs free. Turn the machine on
and start new cutting operation with reduced
feed force.
16 Do not leave a tool key inserted
–Before switching on, make sure that keys and
adjusting tools are removed.
17 Avoid inadvertent starting
–Make sure that the switch is switched o󰀨
when plugging the plug into an outlet.
18 Use extension cables for outdoors
–Only use approved and appropriately identi-
ed extension cables for use outdoors.
–Only use cable reels in the unrolled state.
19 Remain attentive
–Pay attention to what you are doing. Remain
sensible when working. Do not use the elec-
tric tool when you are distracted.
20 Check the electric tool for potential damage
–Protective devices and other parts must be
carefully inspected to ensure that they are
fault-free and function as intended prior to
continued use of the electric tool.
–Check whether the moving parts function
faultlessly and do not jam or whether parts
are damaged. All parts must be correctly
mounted and all conditions must be fullled to
ensure fault-free operation of the electric tool.
–The moving protective hood may not be xed
in the open position.
–Damaged protective devices and parts must
be properly repaired or replaced by a recog-
nised workshop, insofar as nothing di󰀨erent is
specied in the operating manual.
–Damaged switches must be replaced at a
customer service workshop.
–Do not use any faulty or damaged connection
cables.
6 Do not overload your electric tool
–They work better and more safely in the speci-
ed output range.
7 Use the correct electric tool
–Do not use low-output electric tools for heavy
work.
–Do not use the electric tool for purposes for
which it is not intended. For example, do not
use handheld circular saws for the cutting of
branches or logs.
–Do not use the electric tool to cut rewood.
8 Wear suitable clothing
–Do not wear wide clothing or jewellery, which
can become entangled in moving parts.
–When working outdoors, anti-slip footwear is
recommended.
–Tie long hair back in a hair net.
9 Use protective equipment
–Wear protective goggles.
–Wear a mask when carrying out dust-creating
work.
10 Connect the dust extraction device if you will be
processing wood, materials similar to wood, or
plastics. ATTENTION! The dust extractor must
not be connected when processing metals.
Risk of re and explosion due to hot swarf
or ying sparks!
–If connections for dust extraction and a
collecting device are present, make sure that
they are connected and used properly.
–When processing wood, materials similar to
wood, and plastics, operation in enclosed
spaces is only permitted with the use of a
suitable extraction system.
11 Do not use the cable for purposes for which it is
not intended
–Do not use the cable to pull the plug out of the
outlet. Protect the cable from heat, oil and sharp
edges.
12 Secure the workpiece
–Use the clamping devices or a vice to hold
the workpiece in place. In this manner, it is
held more securely than with your hand.
–An additional support is necessary for long
workpieces (table, trestle, etc.) in order to
prevent the machine from tipping over.
–Always press the workpiece rmly against
the working plate and stop in order to prevent
bouncing and twisting of the workpiece.
13 Avoid abnormal posture
–Make sure that you have secure footing and
always maintain your balance.
–Avoid awkward hand positions in which a
sudden slip could cause one or both hands to
come into contact with the saw blade.
14 Take care of your tools
–Keep cutting tools sharp and clean in order to
be able to work better and more safely.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach KZS1500 Primaster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KZS1500 Primaster in the language / languages: English, German, French as an attachment in your email.

The manual is 5.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info