782423
15
Zoom out
Zoom in
Previous page
1/136
Next page
15
• Relevant accident prevention regulations and other,
gene rally recognized safety-technical rules must also
be adhered to.
• The machine may only be used, maintained, and op-
erated by persons familiar with it and instructed in its
operation and procedures. Arbitrary alterations to the
machine release the manufacturer from all responsi-
bility for any resulting damages.
• The machine may only be used with original accesso-
ries and tools made by the manufacturer.
m Remaining hazards
The machine has been built using modern technology in
accor dance with recognized safety rules. Some remaining
hazards, how ever, may still exist.
• Only process selected woods without defects such as:
Branch knots, edge cracks, surface cracks. Wood with
such defects is prone to splintering and can be haz-
ardous.
• Wood which is not correctly glued can explode when
being processed due to centrifugal force.
• Trim work piece to a rectangular shape, center and
cor rectly secure before processing. Unbalanced work
pieces can be hazardous.
• Long hair and loose clothing can be hazardous when
the work piece is rotating. Wear personal protective
gear such as a hair net and tight fitting work clothes.
• Saw dust and wood chips can be hazardous. Wear per-
so nal protective gear such as safety goggles and a dust
mask.
• The use of incorrect or damaged mains cables can lead
to injuries caused by electricity.
• Even when all safety measures are taken, some re-
maining hazards which are not yet evident may still
be present.
• Remaining hazards can be minimized by following the
instructions in „Safety Precautions“, „Proper Use“ and
in the entire operating manual.
• Do not force the machine unnecessarily: excessive
cutt ing pressure may lead to rapid deterioration of the
blade and a decrease in performance in terms of finish
and cutting precision.
• When cutting aluminium and plastics always use the
app ro priate clamps: all workpieces must be clamped
down firmly.
• Avoid accidental starts: do not press the start button
while inserting the plug into the socket.
• Always use the tools recommended in this manual
to obtain the best results from your cutting-off ma-
chine.
• Always keep hands away from the work area when the
ma chine is running; before performing tasks of any
kind release the main switch button located on the
handgrip, thus disconnecting the machine.
• Always keep hands away from the work area when the
machine is running; before performing tasks of any
kind release the main switch button located on the
handgrip, thus disconnecting the machine.
pectées.
• Respecter les consignes de prévention antiaccidents
appropriées, ainsi que les autres règles de sécurité
techniques reconnues en général.
• Utilisation, entretien, mise en condition de la machine
Scheppach uniquement par des personnes familiari-
sées et qui sont informées des dangers inhérents.
Toute initiative de modification de la machine exclut
la responsabilité du constructeur pour les dommages
y faisant suite.
• La machine doit être utilisée uniquement avec des ac-
cessoires et des outils d’origine du constructeur.
m Risques résiduels
La machine est construite selon les règles de l’art et les
règles techniques de sécurité reconnues. Il est cependant
possible que des risques résiduels apparaissent pendant le
travail.
• Utilisez seulement des bois sélectionnés, sans défaut
tel que: Noeuds, fissures transversales, fentes super-
ficielles. Le bois défectueux a tendance à éclater et
présente des risques pour le travail.
• Les morceaux de bois qui n’ont pas été correctement
collés peuvent, en raison de la force centrifuge, explo-
ser pendant le travail.
• Avant de monter la pièce brute, la tailler en forme
carrée, la centrer et veiller au montage correct. Le dé-
séquilibrage de la pièce à usiner est source de bles-
sures.
• Risques pour la santé provenant de la pièce à usiner
en mouvement rotatoire en raison des cheveux longs
et de vêtements flottants.
• Risques pour la santé par les poussières de bois ou
copeaux de bois. Porter des équipements de protec-
tion personnels tels que protection des yeux et masque
antipoussière.
• Risques électriques si utilisation de câbles de raccor-
dement électriques non conformes.
• De plus, malgré toutes les précautions prises, des ris-
ques résiduels non évidents peuvent exister.
• Les risques résiduels peuvent être minimisés si les
«Consignes de sécurité» et l’«Utilisation conforme à
la destination» ainsi que les Instructions d’utilisation
sont intégralement respectées.
• Ne pas forcer inutilement la machine: une pression de
coupe excessive peut détériorer rapidement la lame et
réduire les prestations de la machine quant à la finition
et à la précision de coupe.
• Lors de la coupe de l’aluminium et des matières plas-
tiques utiliser toujours les étaux appropriés: les piè-
ces soumises à la coupe doivent être bloquées dans
l’étau.
• Eviter des démarrages accidentels: ne pas presser le
bouton-poussoir de marche pendant que vous insérez
la fiche dans la prise de courant.
• Utiliser les outils recommandés dans ce Manuel si
vous voulez que votre tronçonneuse vous assure des
prestations optimales.
• Eloigner toujours les mains de la zone de travail pen-
dant que la machine est en service; avant d’effectuer
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach KGZ251 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KGZ251 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Turkish, Finnish as an attachment in your email.

The manual is 4.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info