782423
7
Zoom out
Zoom in
Previous page
1/136
Next page
7
Know your Pullover Mitre Saw (Fig. 1)
1 Handle
2 Start button
3 Locking key
4 Locking lever of saw blade cover
5 Engine
6 Saw blade
7 Saw blade cover, moveable
8 Saw blade cover, fixed
9 Base
10 Pull carriage
11 Revolving table
12 Locking bolt
13 Lever for catch position
14 Saw dust bag
15 Clamping jaw
16 Extension support
17 Mounting holes
18 Table insert
19 Laser
kgz 251
Extent of delivery
Mitre Saw kgz 251
Operating instructions
Technical data
ø blade 254 mm
ø bore 30 mm
Dimensions 795 x 760 x 600 mm
Weight 17,4 k g
ø turn table 272 mm
Mitre stops left and
right
45°, 30°, 22,5°, 15°, 0°,
15°, 22,5°, 30°, 45°, 60°
Mitre angle range 45° left and 60° right
Bevel angle range 0°–4
Max. Capacity
Cross cut at 9 305 x 75 mm
Mitre cut at 4 210 x 75 mm
Becel cut at 45° 305 x 45 mm
Compound cut at 45° 210 x 45 mm
Drive
Motor V/Hz 230V / 50 Hz
Consumption power
P1 2250 W (S6/25%)
No load speed 2500 1/min
Subject to technical changes!
The noise levels of this machine during cutting are as fol-
lows:
maximum sound pressure level: 91dB(A)
General Notes
• When you unpack the device, check all parts for pos-
sible transport damages. In case of complaints the
supplier is to be informed immediately. Complaints
received at a later date will not be acknow ledged.
• Check the delivery for completeness.
• Read the operating instructions to make yourself fa-
miliar with the device prior to using it.
• Only use original Scheppach parts for accessories as
well as for wearing and spare parts. Spare parts are
Apprenez à connaître votre scie à onglet radiale (Fig. 1)
1 Poignée
2 Touche de démarrage
3 Touche de verrouillage
4 Levier de verrouillage protection de la lame de scie
5 Moteur
6 Lame de scie
7 Protection mobile de la lame de scie
8 Protection fixe de la lame de scie
9 Socle
10 Chariot
11 Table tournante
12 Vis de blocage
13 Levier pour la position de trame
14 Sac à copeaux
15 Bride de serrage
16 Support d’allonge
17 Trous de fixation
18 Insert de table
19 Laser
kgz 251
Volume de livraison
Scie à onglets radiales kgz 251
Instructions d’utilisation
Dates techniques
ø lame 254 mm
ø alésage 30 mm
Dimensions 795 x 760 x 600 mm
Poids 17,4 k g
ø Plaque tournante 272 mm
Butées d’onglet à
gauche et à droite
45°, 30°, 22,5°, 15°, 0°,
15°, 22,5°, 30°, 45°, 60°
Amplitude d’angle
d’onglet 45° à fauche et 60° à droite
Amplitude d’angle de
chanfrein 0°–45°
Limites
d’explotaition
Coupe transversale
à 9 305 x 75 mm
Coupe d’onglet à 45° 210 x 75 mm
Coupe en biseau
à 4 305 x 45 mm
Coupe combinée
à 4 210 x 45 mm
Moteur
Moteur V/Hz 230V / 50 Hz
Consumption power
P1 2250 W (S6/25%)
Vitesse à vide 2500 1/min
Sous réserve de modifications!
Pendant la coupe, les niveaux de bruit de la scie à onglet
sont les suivants:
niveau maximal de pression sonore : 91 dB(A)
Instructions générales
• Vérifier dès la livraison, qu’aucune pièce n’ait été dé-
tériorée pendant le transport. En cas de réclamation,
informer aussitôt le livreur. Nous ne pouvons tenir
compte des réclamations ultérieures.
• Vérifier que la livraison soit bien complète.
• Familiarisez-vous avec la machine avant la mise en
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach KGZ251 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KGZ251 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Turkish, Finnish as an attachment in your email.

The manual is 4.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info