782110

Scheppach K6 154 Kity Manual

45
Zoom out
Zoom in
Previous page
1/56
Next page
45
2. Remplacement de la lame de scie
• Placer l’interrupteur sur arrêt.
• Débrancher la machine du réseau.
• Enlever l’insert de table.
• Placer la lame de scie en position supérieure et la
serrer.
• Maintenir la bride de serrage avec la clé plate et
desserrer la vis de fixation avec une clé Allen. Ensuite
enlever prudemment la bride et la lame de scie. Placer
la lame de scie neuve.
• Veiller au sens de rotation.
3. Réglage du départoir.
Attention! Lors du réglage, risque de blessures sur la lame
de scie
Après le remplacement de la lame de scie, le départoir
doit de nouveau être réglé.
Desserrer la vis à six pans, régler le départoir.
La distance du départoir au-dessous de la lame de scie
doit être de 3 à 8 mm. Resserrer la vis à six pans.
2. Replacement of saw blades
• Turn the switch to OFF!
• Unplug the machine.
• Remove the table inset.
• Move the saw blade up all the way and lock it in place.
• Hold the tension flange with an open end wrench and
loosen the attachment screws with an Allen wrench.
Now carefully remove the flange and the saw blade.
Now the new saw blade can be put in place.
• Pay attention to the correct rotational direction.
3. Positioning the splitter.
Attention! Danger of injury by the saw blade when positioning
When the saw blade is replaced, the splitter must be
repositioned.
Loosen the hex driver, position the splitter properly.
The splitter must be 3-8 mm under the saw blade. Tighten
the hex driver.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach K6 154 Kity at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach K6 154 Kity in the language / languages: English, German, French as an attachment in your email.

The manual is 6.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info