781926
35
Zoom out
Zoom in
Previous page
1/44
Next page
www.scheppach.com
GB | 35
9.4 Overload indicator (14)
Overload protection is active at too high a power take-o󰀨 - Turns o󰀨 230 V sockets (9).
Turn o󰀨 the unit (see section 9.2).
Connected devices from separate generator. The unit (see section 9.1).
9.5 Operating display (15)
Power indicator active - when the engine is running.
9.6 Energy saving switch (9)
Reduce fuel consumption / idle - Energy saving switch “ON“ position.
9.7. Electrical safety
Electrical cables and attached devices must be defect free.
Never connect the generator to the mains (power point).
Keep the cables as short as possible.
9.8 Connecting to earth (g. 2)
The housing can be connected to earth to discharge static electricity. To do this, connect one end of
a cable to the earthing connection (7) on the generator and the other end to an external ground (z.
B. for example to an earthing rod).
9.9 12 V Connection
At the 12 V DC connection (11), a 12 V battery can be charged using the included cable.
10. Maintenance
m WARNING
Carry out maintenance work only with the stopped engine.
Pull the spark plug cap from the spark plug
Oil change
Change the engine oil after 25 operating hours, then after 50 hours or every three months.
The engine oil change should take place when the engine is at operating temperature.
When changing the oil, have a non-leaking container available.
Remove the engine cover (Fig. 5 Pos. 5)
Open the oil ller plug (Fig. 6 Pos. A)
Drain the old oil into a suitable container by tilting the generator.
Fill the engine oil to the upper mark of the dipstick using the oil-lling container.
Dispose of the oil in accordance with stipulations. Take the old oil to a collection point. Most petrol
stations, garages or recycling centres take back old oil free of charge.
Air lter
Frequently cleaning of the air lter prevents carburetor malfunction.
Clean the air lter and change air lter inserts
The air lter should be cleaned every 30 hours.
Remove the engine cover (Fig. 5 Pos. 5)
Remove the air lter cover (Fig. 8 Pos. B)
Remove the air lter (Fig. 8 Pos. C)
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach IGT2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach IGT2500 in the language / languages: English, German as an attachment in your email.

The manual is 8.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info