781926
37
Zoom out
Zoom in
Previous page
1/44
Next page
www.scheppach.com
GB | 37
11. Storage
1. Perform all general maintenance, which are in the User’s Guide in the Maintenance section.
2. Let the fuel out of the tank (Use a commercially plastic fuel pump from the hardware store).
3. After the fuel is drained, start the machine.
4. Let the machine in idle speed running until it stops. That cleans the carburetor from the remaining
fuel.
5. Let the machine cool down. (about 5 minutes)
6. Remove the spark plug.
7. Fill a small amount of 2-stroke engine oil into the ring chamber. Pull out several times the starter
cord gently to wet the internal components with the oil.
8. Replace the spark plug.
9. Clean the outer casing of the machine.
10. Keep the machine on a cold, dry place out of reach of ignition sources and ammable substanc-
es.
Recommissioning
1. Remove the spark plug.
2. Pull the starter rope out several times. It cleans the ring chamber of oil residues.
3. Clean the spark plug contacts or install a new spark plug.
4. Fill the tank.
12. Transport
m WARNING
Let the engine cool down before transporting the machine or storing indoors to avoid burns or re
hazards.
If you want to transport the unit empty the fuel tank before. Clean the unit with a brush or a broom
of coarse dirt.
13. Disposal and recycling
The equipment is supplied in packaging to prevent it from being damaged in transit. The raw ma-
terials in this packaging can be reused or recycled. The equipment and its accessories are made
of various types of material, such as metal and plastic. Defective components must be disposed
of as special waste. Ask your dealer or your local council.
Old devices must not be disposed of with household waste!
This symbol indicates that this product must not be disposed of together with domestic waste
in compliance with the Directive (2012/19/EU) pertaining to waste electrical and electronic
equipment (WEEE). This product must be disposed of at a designated collection point. This
can occur, for example, by handing it in at an authorised collecting point for the recycling of
waste electrical and electronic equipment. Improper handling of waste equipment may have neg-
ative consequences for the environment and human health due to potentially hazardous substanc-
es that are often contained in electrical and electronic equipment. By properly disposing of this
product, you are also contributing to the e󰀨ective use of natural resources. You can obtain infor-
mation on collection points for waste equipment from your municipal administration, public waste
disposal authority, an authorised body for the disposal of waste electrical and electronic equipment
or your waste disposal company.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach IGT2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach IGT2500 in the language / languages: English, German as an attachment in your email.

The manual is 8.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info