Manual Scheppach HWW1300 (page 27 of 88) (English, German, French, Finnish)

781427

Zoom out

Zoom in

1/88

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 27

• The pressure in the pressure vessel

should be approx. 1.5 bar max. If the

air pressure is too low, it should be in-

creased again. To do this unscrew the

valve cover (10) on the container and

add the missing pressure with a tyre

inator gauge via the valve (11). Then

screw the valve cover back on.

Connections and repairs

Connections and repairs of electrical

equipment may only be carried out by an

electrician.

Please provide the following informa-

tion in the event of any enquiries:

• Type of current for the motor

• Machine data - type plate

Service information

Please note that the following parts of

this product are subject to normal or nat-

ural wear and that the following parts are

therefore also required for use as con-

sumables.

Wear parts*: Seals, pre-lter

* Not necessarily included in the scope of

delivery!

11. Transport

Use only the transport handle (2) for

transporting the device.

10. Cleaning and Maintenance

Attention!

Only carry out maintenance, cleaning and

adjustment work when the mains plug is

pulled out. We recommend that you clean

the device directly after every use.

Clean the device at regular intervals using

a damp cloth and a little soft soap.

Do not use any cleaning products or sol-

vents - they could attack the plastic parts

of the universal machine stand. Make

sure that no water can penetrate the de-

vice interior.

• The pump is largely maintenance-free.

However, for a long service life, we rec-

ommend regular checking and care.

• Before extended periods of inactivity or

through the winter, the pump should be

thoroughly ushed through with water,

emptied completely and then stored dry.

• To empty the pump housing, loosen the

water drain screw (5) and tilt the pump

slightly.

• If there is a risk of frost the pump must

be completely emptied.

• After longer periods of storage check the

pump by switching on/o󰀨 briey in order

to check that the rotor turns normally.

• In the event of the pump being jammed

connect the pressure line to the wa-

ter supply line and remove the suc-

tion hose. Open the water supply line.

Switch the pump on for ca. two seconds

several times. This method recties

blockages in most cases.

• To clean the pre-lter (9), unscrew the

pre-lter cap (8) and remove the lter

unit. Clean the pre-lter with warm wa-

ter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HWW1300 in the language / languages: English, German, French, Finnish as an attachment in your email.

The manual is 2.37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HWW1300 Manual

Product: