644537

Scheppach HT850 Manual

27
Zoom out
Zoom in
Previous page
1/64
Next page
international 27
Avis importants:
Le moteur électrique a été construit pour le mode d’em
ploi S6 / 40 %.
Câbles de branchement électrique défectueux:
Il arrive fréquemment que l’isolation des câbles de bran-
chement électrique présente des avaries. Les causes en
sont:
• Ecrasements, si le câble passe sous la porte ou la fe-
nêtre.
• Coudes dûs à une mauvaise fixation ou un mauvais gui-
dage du câble de branchement.
• Coupures dues à un écrasement du câble.
• Extractions violentes du câble de la prise murale.
• Fissures due au vieillissement de l’isolation.
Il est déconseillé d’utiliser des câbles électriques qui pré-
sentent ces types d’avaries. Danger de mort. Vérifier ré-
gulièrement les câbles de branchement électrique. Veiller
à ce que le câble n’entre pas en contact avec la tension
de secteur pendant la vérification. Les câbles de branche-
ment électrique doivent correspondre aux normes VDE et
DIN en vigueur. Utiliser des câbles marqués «HO 7 RNF».
Moteur monophasé, Fig. 12
• La tension du secteur doit être de 230 V / 50 Hz.
• Les câbles de rallonge d’une longueur maximale de 25
m doivent présenter une section transversale de 1,5
mm², ceux d’une longueur supérieure à 25 m doivent
présenter une section transversale de 2,5 mm².
• Le branchement au réseau est équipé d’un fusible à
action retardée de 16 A.
En cas de questions suppplémentaires, veuillez fournir
des indications suivantes:
• Fabricant du moteur
• Nature du courant du moteur
• Données se trouvant sur la plaque signalétique de la
machine
• Données se trouvant sur la plaque signalétique du con
jonteur
En cas de renvoi du moteur, toujours envoyer l’unité mo-
teur complète avec le conjoncteur.
Pièces de réchange importantes
Article No. d’article
Fers de rabot, jeu = 2 pièces 390 2202 701
Moteur 230 V 390 2202 010
Conjoncteur 230 V 390 2202 011
Courroie plate 390 2202 012
Important hints:
The electric motor has been design for operating mode S6
/ 40 %.
Defective electrical connection cables:
Electrical connection cables often suffer insulation dam-
age. Possible causes are:
• Pinch points when connection cables are run through
window or door gaps.
• Kinks resulting from incorrect attachment or laying of
the connection cable.
• Cuts resulting from running over the connecting ca-
ble.
• Insulation damage resulting from forcefully pulling out
of the wall socket.
• Cracks through aging of insulation.
Such defective electrical connection cables must not be
used as the insulation damage makes them extremely haz-
ardous.
Check electrical connection cables regularly for damage.
Make sure the cable is disconnected from the mains when
checking. Electrical connection cables must comply with
the regula- tions VDE and DIN. Only use cables marked
„HO 7 RNF“. This is a binding regulation.
Single-phase motor, Fig. 12
• The voltage of the power supply must be 230 V / 50
Hz.
• Extension cables up to a length of 25 m must have a
cross-section of 1.5 mm², and beyond 25 m at least
2.5 mm².
• The connection to the mains must be protected with a
16 A slow-acting fuse.
In the event of enquiries please specify the following
data:
• Motor manufacturer
• Type of current of the motor
• Data recorded on the machine’s rating plate
• Data recorded on the switch’s rating plate
If the motor has to be returned, it must always be dis-
patched with the complete driving unit and switch.
Important spare parts
Part Part number
Planer/Thicknesser knives, set = 2
pieces
390 2202 701
Motor 230V 390 2202 010
Switch 230V 390 2202 011
Flat belt 390 2202 012
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HT850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HT850 in the language / languages: English, German, French, Italian, Spanish, Finnish as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info