644537

Scheppach HT850 Manual

17
Zoom out
Zoom in
Previous page
1/64
Next page
international 17
venir malgré toutes les précautions prises.
• Les risques résiduels peuvent être réduits si les «règles
de sécurité» et «l’utilisation conforme aux prescrip-
tions» ainsi que le mode d’emploi sont respectés.
Installation
Préparer le lieu de travail pour la machine. Créer de la
place suffisante pour permettre un travail sans dangers
et sans problèmes. La machine a été construite pour être
utilisée dans des locaux fermés et doit reposer sur un sup-
port stable.
La machine peut être montée sur un établi (pièces de
montage non fournies) (Fig. 1).
Transport
Pour transporter, n’attacher le dispositif de relevage qu’au
bâti, jamais aux dispositifs protecteurs, aux poignées de
réglage ou à la table de dégauchissage.
Pour le transport, débrancher la prise d’alimentation.
Lors du transport, le protecteur de l’arbre de rabotage doit
se trouver dans la position la plus basse.
Déballage de la machine
Vérifier dès la livraison, qu’aucune pièce n’ait été détério-
rée pendant le transport. En cas de réclamation, informer
aussitôt le livreur. Vérifier que la livraison soit bien com-
plète. En cas de réclamation, informer aussitôt le vendeur.
La machine est expédiée dans un seul carton. Des acces-
soires supplémentaires doivent être localisés et identifiés
avant le début du montage.
Fig. 2
1 Raboteuse-dégauchisseuse
2 Butée de rabotage
3 Clé à fourche 4 mm
4 Poignée
5 Vis à tête cylindrique à 6 pans creux 5 – 1,0 x 15
6 Circlip extérieur 5 mm
7 Rondelle 5 mm
8 Buse d’aspiration
Setting-Up
Prepare the location of the machine. Make sure there is
sufficient space to allow safe and trouble-free working.
The machine has been designed to operate in enclosed
rooms. It must be set up in a stable way on a level, firm
ground.
The machine can be fastened to a work bench (fixing ma-
terial not included in the supply extent (Fig. 1).
Transport
For transport, the machine may only be lifted on the base.
Never lift it on the guards, the setting handles or the plan-
er/thicknesser table.
Before transporting, pull the power supply plug.
During transport, the cutter block guard must be set in the
lowest position.
Unpacking the machine
Check the contents of any possible transport damage.
In case of a damage, inform immediately the forwarding
agent. Check the contents for completeness. Inform im-
mediately the dealer in case of any missing parts. The
complete machine is shipped in one single carton box.
Any additional parts that have to be attached to the ma-
chine, must be identified before starting the assembly.
Fig. 2
1 Planing and thicknessing machine
2 Ripping fence
3 Hexagon wrench 4 mm
4 Handle
5 Socket head cap screw 5 – 1.0 x 15
6 Locking ring 5 mm
7 Washer 5 mm
8 Suction connector
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HT850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HT850 in the language / languages: English, German, French, Italian, Spanish, Finnish as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info