782092

Scheppach HT1050 Manual

29
Zoom out
Zoom in
Previous page
1/108
Next page
29
Single-phase motor
• The voltage of the power supply must be 230 V / 50
Hz.
• Extension cables up to a length of 25 m must have a
cross-section of 1.5 mm², and beyond 25 m at least
2.5 mm².
• The connection to the mains must be protected with
a 16 A slow-acting fuse.
In the event of enquiries please specify the following
data:
• Type of current of the motor
• Data recorded on the machine's rating plate
• Data recorded on the switch's rating plate
If the motor has to be returned, it must always be dis-
patched with the complete driving unit and switch.
• The product meets the requirements of EN 61000-3-
11 and is subject to special connection conditions. This
means that use of the product at any freely selectable
connection point is not allowed.
• Given unfavorable conditions in the power supply the
product can cause the voltage to uctuate temporarily.
• The product is intended solely for use at connection
points that
a) do not exceed a maximum permitted supply imped-
ance “Z”, or
b) have a continuous current-carrying capacity of the
mains of at least 100 A per phase.
• As the user, you are required to ensure, in consulta-
tion with your electric power company if necessary, that
the connection point at which you wish to operate the
product meets one of the two requirements, a) or b),
named above.
Moteur monophasé
• La tension du secteur doit être de 230 V / 50 Hz.
• Les câbles de rallonge d’une longueur maximale de 25
m doivent présenter une section transversale de 1,5
mm², ceux d’une longueur supérieure à 25 m doivent
présenter une section transversale de 2,5 mm².
• Le branchement au réseau est équipé d’un fusible à
action retardée de 16 A.
En cas de questions suppplémentaires, veuillez fournir
des indications suivantes:
• Nature du courant du moteur
• Données se trouvant sur la plaque signalétique de
la machine
• Données se trouvant sur la plaque signalétique du
concjonteur
En cas de renvoi du moteur, toujours envoyer l’unité
moteur complète avec le conjoncteur.
• Le produit répond aux exigences de la norme EN
61000-3-11 et est soumis à des conditions de raccorde-
ment spéciales. Autrement dit, il est interdit de l’utiliser
sur un point de raccordement au choix.
• L’appareil peut entraîner des variations de tension pro-
visoires lorsque le réseau n’est pas favorable.
• Le produit est exclusivement prévu pour l’utilisation
aux points de raccordement
a) qui ne dépassent pas une impédance de réseau
maximale autorisée de «Z» ou
b) qui ont une intensité admissible du courant perma-
nent d’au moins 100 A par phase.
• En tant qu’utilisateur, vous devez vous assurer, si
nécessaire en consultant votre entreprise d’électricité
locale, que le point de raccordement avec lequel vous
voulez exploiter le produit, répond à l’une des deux exi-
gences a) ou b).
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HT1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HT1050 in the language / languages: English, German, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info