Manual Scheppach HT1050 (page 11 of 108) (English, German, French, Italian, Swedish, Norwegian, Finnish)

782092

Zoom out

Zoom in

1/108

use.

• Do not overload the machine and only use it within

the performance range specied in the chapter

Technical Data of the operating manual.

• When working outside, do not stand on slippery

ground and wear solid shoes.

• Do not misuse the cable. Protect it from heat, oil,

and sharp edges.

• Only use well-sharpened planing knives for better

and safe work.

• Maintain the handles dry, clean and free from oil and

grease.

• Before switching on the machine, remove all keys

and setting tools.

• When working outside, only use the correctly

marked and authorized extension cable.

• Keep other people, especially children, away from

the machine when it is connected to the power

supply.

• Be attentive and pay attention to what you are

doing. Use your good sense and do not work with

the machine when you are not concentrated.

• Operating personnel must be at least 18 years of

age. Trainees must be at least 16 years of age,

but may only operate the machine under adult

supervision.

• Persons working on the machine may not be

diverted from their work.

• The working space on the machine must be free

of chips and wood scrap. Disorder can cause

accidents.

• Protect the machine from rain and moisture.

• Do not use the machine in a humid or wet

environment.

• Store the machine in a safe place, so that nobody

can get injured or switch on the machine. Make sure

that the machine is not parked in the open or in a

humid environment without protection.

• Only use the machine according to instructions and

to the purpose it has been designed for.

• Do not use the machine where there is a risk of re

or explosion.

• When working with the machine, do not touch any

earthed parts (e.g. tubes, radiators, electric stoves,

coolers).

• Wear only close-tting clothes. Remove rings,

bracelets and other jewelry.

• Wear ear protection, goggles and a dust protection

mask.

• To protect long hair, wear a cap or hair net.

• For changing the planer/thicknesser knives, wear

solid gloves.

• Do not wear any gloves for working on the machine,

with the exception when handling rough work

pieces.

• The safety mechanisms on the machine may not be

removed or rendered unusable. Cleaning, changing,

calibrating, and setting of the machine may only be

carried out when the motor is switched off. Pull the

power supply plug and wait for the rotating tool to

completely stop.

• Tenir les enfants et d'autres personnes à distance

quand la machine est branchée au réseau.

• Faire attention à ce que les enfants n’ont pas

d’accès à la machine inutilisée.

• Ne pas surcharger la machine. L'utiliser uniquement

conforme aux Données techniques citées dans le

manuel.

• Lors du travail en pein air, maintenir une position

ferme et porter des chaussures antiglissantes.

• Ne pas abuser du câble. Le protéger de la chaleur,

de l’huile et des arêtes tranchantes.

• Pour un bon résultat, ne travailler qu’avec des fers

de rabot bien affûtés.

• Maintenir les poignées sèches, propres et libre

d’huile et de graisse.

• Avant de mettre la machine en marche, vérier qu’il

n’y a pas de clés ou d’autres outils sur la table.

• Lors du travail en plein air, n'utiliser que des câbles

de rallonge autorisés et marqués.

• Tenir les enfants et d'autres personnes à distance

quand la machine est branchée au réseau.

• Faire attention au travail exécuté. User le bon sens.

Ne pas travailler sur la machine en état inconcentré.

• La personne utilisatrice doit avoir 18 ans au moins.

Les élèves à former doivent avoir 16 ans au moins,

et travailler uniquement sous surveillance.

• Ne pas distraire une personne en train de travailler

sur la machine.

• L'emplacement de travail doit être maintenu libre

de copeaux et de chutes de bois. Le désordre peut

causé des accidents.

• Protéger la machine de la pluie et de l’humidité.

• Ne pas utiliser la machine dans un environnement

humide.

• Garder la machine dans un endroit sûr pour que

personne ne peuve se blesser ou la mettre en

marche. Ne pas laisser la machine en plein air ou

dans un environnement humide sans protection.

• Utiliser la machine uniquement conformément à son

emploi prévu.

• Ne pas utiliser la machine dans un endroit où il y a

un risque de feu ou d’explosion.

• Lors du travail, éviter le contact des pièces mises à

terre (p.ex. tuyaux, radiateurs, cuisinière électrique,

appareils frigoriques).

• Porter des vêtements bien seyants. Enlever les

bijoux, bagues, et montres.

• Protéger votre corps en portant des lunettes

protectrices, des protège-oreilles et une masque

antipoussière.

• Pour protéger les cheveux longs, porter une

casquette ou un let.

• Porter des gants appropriés pour changer les

couteaux.

• Lors du travail sur la machine, des gants ne sont

pas permis – à l’exeption lors du traitement de bois

très rugueux.

• Les consignes de sécurité, de travail, et d’entretien

du constructeur ainsi que les dimensions qui sont

indiquées dans les données techniques, doivent être

respectées.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HT1050 in the language / languages: English, German, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2.72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HT1050 Manual

Product: