782092

Scheppach HT1050 Manual

7
Zoom out
Zoom in
Previous page
1/108
Next page
7
HT1050
Extent of delivery
Planer/Thicknesser HT1050
Sliding handle
ripping fence
Combined suction hood
Key for HM-setting
Operating instructions
Technical data
Number of knives 2 pieces
Cutter block rpm 9000 1/min
Dimensions 1020 x 525 x 445 mm
Weight 27,5 kg
Technical data – Planning
Max planing width 258 mm
Max chip removal 2 mm
Ripping fence
l x h 610 x 127 mm
Ripping fence
tilting angle 90°–45°
Surfacing table
size 445 x 263 mm
Technical data – Thicknessing
Max planing width 254 mm
Max planing
thickness 120 mm
Max chip removal 2 mm
Thicknessing
table size 380 x 254 mm
Drive
Motor V/Hz 230V / 50 Hz
Consumption
power P1 1500 W
Protection circuit yes
No Volt relays yes
Subject to technical changes!
Noise parameters acc. to EN ISO 3744
The indicated rates are emission rates and do not cor-
respond with safe working rates. Although there is a
correlation between emission and immission levels, it
is not sure whether reliable precautions are necessary
or not. The following factors can inuence the present
immission level at the working place: Time of impact,
property of working room, other noise sources (for in-
stance, number of machines and other neighbouring
activities. The reliable working place rates can also vary
from one country to another. Yet this information should
enable the user to perform a better evaluation of the
dangers and risks,
Acoustic power level in dB
no load LWA = 102,3 dB(A) with thicknessing
no load LWA = 102,3 dB(A) with surfacing
full load LWA = 107,3 dB(A) with thicknessing
full load LWA = 108,5 dB(A) with surfacing
Acoustic pressure level at working place in dB
no load = 89,5 dB(A) with thicknessing
no load = 89,5 dB(A) with surfacing
full load LWA = 96,3 dB(A) with thicknessing
full load LWA = 97,2 dB(A) with surfacing
A measuring uncertainty coefcient (K = 3 dB) applies
to the values listed above.
HT1050
Volume de livraison
Raboteuse-dégauchisseuse
Poignée coulissante
Outils de montage
Capot combiné d’aspiration
Clé pour le réglage HM
Instructions d’utilisation
Dates techniques
Nombre de couteaux 2 pièces
Tr/mn de l’arbre de
rabotage 9000 1/min
Dimensions 1020 x 525 x 445 mm
Poids 27,5 kg
Dates techniques – dégauchissage
Largeur de travail max. 258 mm
Enlèvement de
copeaux max. 2 mm
Butée de
dégauchissage l x h 610 x 127 mm
Plage de pivotement
de la butée 90°–45°
Table de
dégauchissage 445 x 263 mm
Dates techniques – rabotage
Largeur de travail max. 254 mm
Epaisseur de travail
max. 120 mm
Enlèvement de
copeaux max. 2 mm
Table de rabotage 380 x 254 mm
Moteur
Moteur V/Hz 230V / 50 Hz
Consommation de
courant P1 KW 1500 W
Protection moteur oui
Relais sans potentiel oui
Sous réserve de modications!
Paramètres du bruit selon EN ISO 3744
Les valeurs du bruit citées sont des valeurs émis et ne
correspondent pas toujours aux valeurs de travail sûres.
Bien qu’il ait une correlation entre les niveaux d’émis-
sion et d’immission, il n’est pas possible d’en déduire
ablement si des précautions supplémentaires seront
necessaires ou pas. Des facteurs pouvant inuencer le
niveau d’immission sur le lieu de travail sont: Durée du
bruit, caractéristique de l’espace, d’autres sources de
bruit etc., par exemple, la quantité d’autres machines
en marche. Les valeurs du bruit peuvent varier selon le
pays. Cette information doit mettre l’utilisateur en état
d’évaluer les dangers et les risques.
Niveau de puissance sonore en dB
Marche à vide LWA = 102,3 dB(A) lors du rabotage
Marche à vide LWA = 102,3 dB(A) lors du dégauchis-
sage
Traitement LWA = 107,3 dB(A) lors du rabotage
Traitement LWA = 108,5 dB(A) lors du dégauchissage
Niveau de pression acoustique sur le lieu de travail
en dB
Marche à vide LWA = 89,5 dB(A) lors du rabotage
Marche à vide LWA = 89,5 dB(A) lors du dégauchissage
Traitement LWA = 96,3 dB(A) lors du rabotage
Traitement LWA = 97,2 dB(A) lors du dégauchissage
Pour les valeurs d’émission citées, il faut tenir compte
d’une incertitude de mesurage (K) = 3 dB.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HT1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HT1050 in the language / languages: English, German, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info