Manual Scheppach HSM3500 (page 24 of 92) (English, German, French, Spanish)

781910

Zoom out

Zoom in

1/92

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

24 | GB

Keep the operating instructions manual in a plastic

cover near the machine, protected against dirt and

humidity. It must be read and observed carefully by

all machine operators before starting work on the

machine.

Only persons who are trained to use the machine and

who have been instructed about the risks involved

should be allowed to operate the machine. The re-

quired minimum age of workers must to be observed.

Besides the safety instructions contained in this op-

erating instructions manual and the specications

of your country, the generally recognized technical

rules of engagement for the operation of the machine

must also be observed.

2. Layout

1 Saw blade protection

2 ON/OFF switch

3 Handle on the cutting arm

4 Machine head

5 Motor

6 Roll slide with rubber coating

7 Stop rail with scale

8 Tub

9 Guide rails

10 Transport handle

11 Feet

12 Base frame

13 Longitudinal aligning stop

14 Diamond cutting wheel (Fig 3.2)

15 Spray guard

16 Water shut-off valve

17 Spring

18 Water pump (Fig. 3.1)

3. Delivery scope

• Stone and tile cutter

• Roll slide with rubber coating

• Diamond cutting wheel

• Lengthwise aligning stop

• Open-ended spanner and Allen key

General instructions

• After removing the packing, check the compo-

nents for possible transport damage. In case of

complaints, please inform the delivery agent im-

mediately. Subsequent complaints will not be en-

tertained.

• Check the delivery to ensure that it is complete.

• Familiarize yourself with the machine with the help

of the operating instructions manual before using

it.

• Use only original parts for accessories as well as

consumables and spare parts. Spare parts can be

obtained from your scheppach retailer.

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

We wish you lots of fun and success in working with

your new scheppach machine.

Note:

As per the applicable Product Liability Law, the man-

ufacturer of this device will not be liable for damages

that occur in this device or that are caused by this

device in the following cases:

• Improper handling,

• Non-observation of the operating instructions,

• Repair by third parties, unauthorized technicians,

• Installation and replacement with non-original

spare parts,

• Use not in conformity with the manufacturer‘s

specications,

• Failures of the electrical system attributable to

non-observation of the electrical specications

and VDE clauses 0100, DIN 57113 / VDE0113.

We recommend the following:

Please read the instructions in the present manual

carefully before using the tile-cutting machine.

Read the Instructions For Use:

Please read the Instructions for Use carefully before

setting up, commissioning or intervening in the ma-

chine.

Dangerous electric voltage

Caution! Switch off the mains power supply before

making any intervention in the tile-cutting machine.

Risk from sudden start

Caution! The tile-cutting machine can restart sud-

denly after a power failure.

Please read the entire text of the operating instruc-

tions thoroughly before installation and start-up.

This operating instructions manual will help you get

to know the machine and utilize its use options bet-

ter. The operating instructions manual contains im-

portant instructions of working safely, correctly and

economically with the machine, and on how you can

avoid risks, save on repair costs, reduce downtime

and increase the reliability and shelf-life of the ma-

chine.

In addition to the safety clauses of this operating in-

structions manual, you must also observe the speci-

cations of your country applicable to the operation of

the machine without fail.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HSM3500 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 6.7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HSM3500 Manual

Product: