644539
13
Zoom out
Zoom in
Previous page
1/88
Next page
13
Faulty saw blades must be replaced immediately.
Never use saw blades which do not comply with the
data specied in this manual.
Never dismantle the machineʼs safety devices or
render them inoperative.
If the table insert is worn, replace it.
Always stand to the side of the saw blade when work-
ing with the saw.
Never load the machine so much that it cuts out.
Make sure that off-cuts do not catch on the saw blade
crown. Risk of catapulting!
Never remove loose splinters, chips or jammed piec-
es of wood when the saw blade is running, unless a
push stick is used.
To rectify faults or remove jammed pieces of wood,
always switch off the machine rst. Pull the power
plug!
If the sawing gap is worn, replace the table insert.
Pull the power plug!
Carry out retooling work, adjustments, measure-
ments and cleaning jobs only when the motor is
switched off. Pull the power plug!
Before switching on, make sure that all keys and
wrenches have been removed from the tool.
Switch off the motor and pull the power plug before
you leave the workplace.
Ret all guards and safety devices immediately af-
ter you have completed any repairs or maintenance
work.
Be sure to observe the safety information and op-
erating and maintenance instructions issued by the
manufacturer, as well as the dimensions listed in the
Technical Data.
It is imperative to observe the accident prevention
regulations in force in your area as well as all other
generally recognized rules of safety.
Note the information published by your professional
associations (VBG 7j).
The circular saw has to be connected to a 230 V
socket with a 16 A fuse.
Do not use any low-powered machines for heavy
duty work.
Do not use the cable for purposes for which it is not
designed.
Make sure you stand squarely and keep your bal-
ance at all times.
Check the tool for damage.
Each time before re-using the tool, carefully check
that the guards or any slightly damaged parts are
working as intended.
Check that the moving parts are in good working
order, that they do not jam, and that no parts are
damaged. Make sure that all parts are tted correctly
and that all other operating conditions are properly
fullled.
Unless otherwise stated in the operating instructions,
damaged safety devices and parts must be repaired
or replaced by an authorized service center.
Have damaged switches replaced by a customer
service workshop.
This electric tool complies with the pertinent safety
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HS510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HS510 in the language / languages: English, German, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info