Manual Scheppach HS120 (page 31 of 264) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish)

782520

Zoom out

Zoom in

1/264

Assembly of the catch support, Fig. 18

Mount the intermediate plate to the lengthwise catch with

2 ﬂat round screws M6 x 50, 2 screws A6, and 2 wing

nuts.

Edge the catch support onto the intermediate plat and

clip it in with wing nuts.

Legend:

1 = Upper Surface

2 = Lower Surface

To clip in, lift up the clasp. To release, push it down.

Changing the sawblade, Fig. 19

Attention: Pull the power supply plug!

Wear safety gloves when changing the saw blade. Risk of

injury!

Release the wing screw of the suction hood (20) and re-

move the hood.

Fig. 20

Release the 4 Phillips screws of the table insert (19) and

remove the insert.

Illustration 18, Montage du rail de guidage

• Monter la plaquette de tôle intermédiaire avec 2 vis à

tête bombée M6 x 50, 2 rondelles A 6 et 2 écrous à

oreilles sur le guide longueur.

• Pousser le rail de guidage sur la plaquette de tôle

intermédiaire et la ﬁxer avec des écrous à oreilles.

Légende illustration 9

1 = Haute surface d’appui

2 = Basse surface d’appui

Soulever le couvercle de serrage pour serrer. Pousser le

vers le bas pour le retirer

Fig. 19: Remplacement de lame de scie

Attention! Débrancher la ﬁche secteur

Porter des gants de protection pour changer la lame de scie

! Risque de blessure !

Desserrer la vis papillon du capot d’aspiration 20 et la

retirer.

Fig. 20

Desserrer les 4 vis cruciformes et les retirer de l’élément

rapporté de table.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HS120 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9.4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HS120 Manual

Product: