Manual Scheppach HRS800 (page 19 of 108) (English, German, French, Italian)

781640

Zoom out

Zoom in

1/108

19GB

4. Intended use

The cable hoist is designed for lifting and lowering

loads in enclosed areas commensurate with the ma-

chine’s capacity.

Relevant accident prevention regulations and other

generally recognized safety and technical rules must

also be adhered to.

The machine may only be used, maintained or re-

paired by trained persons who are familiar with the

machine and have been informed about the dangers.

Unauthorized modications of the machine exclude

a liability of the manufacturer for damages resulting

from the modications.

The machine is intended for use only with original

spare parts and original tools from the producer.

Any other use is considered to be not intended. The

manufacturer excludes any liability for resulting dam-

ages, the risk is exclusively borne by the user.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial

applications. Our warranty will be voided if the equip-

ment is used in commercial, trade or industrial busi-

nesses or for equivalent purposes.

5. General safety information

Attention! The following basic safety measures must

be observed when using electric tools for protection

against electric shock, and the risk of injury and re.

Read all these notices before using the electric tool

and keep the safety instructions for later reference.

Safe work

1 Keep the work area orderly

–Disorder in the work area can lead to accidents.

2 Take environmental inuences into account

–Do not expose electric tools to rain.

–Do not use electric tools in a damp or wet en-

vironment.

–Make sure that the work area is well-illuminated.

–Do not use electric tools where there is a risk

of re or explosion.

3 Protect yourself from electric shock

–Avoid physical contact with earthed parts (e.g.

pipes, radiators, electric ranges, cooling units).

4 Keep children away

–Do not allow other persons to touch the equipment

or cable, keep them away from your work area.

5 Securely store unused electric tools

–Unused electric tools should be stored in a dry,

elevated or closed location out of the reach of

children.

6 Do not overload your electric tool

–They work better and more safely in the speci-

ed output range.

7 Use the correct electric tool

–Do not use low-output electric tools for heavy work.

–Do not use the electric tool for purposes for

which it is not intended. For example, do not

use handheld circular saws for the cutting of

branches or logs.

–Do not use the electric tool to cut rewood.

8 Wear suitable clothing

–Do not wear wide clothing or jewellery, which

can become entangled in moving parts.

–When working outdoors, anti-slip footwear is

recommended.

–Tie long hair back in a hair net.

9 Avoid abnormal posture

–Make sure that you have secure footing and

always maintain your balance.

10 Do not use the cable for purposes for which it is

not intended

–Do not use the cable to remove the plug from

the power outlet. Protect the cable from heat,

oil and sharp edges.

11 Take care of your tools

–Keep cutting tools sharp and clean in order to

be able to work better and more safely.

–Follow the instructions for lubrication and for

tool replacement.

–Check the connection cable of the electric tool

regularly and have it replaced by a recognised

specialist when damaged.

–Check extension cables regularly and replace

them when damaged.

–Keep the handle dry, clean and free of oil and

grease.

12 Do not leave a tool key inserted

–Before switching on, make sure that keys and

adjusting tools are removed.

13 Avoid inadvertent starting

–Make sure that the switch is switched off when

plugging the plug into an outlet.

14 Use extension cables for outdoors

–Only use approved and appropriately identied

extension cables for use outdoors.

–Only use cable reels in the unrolled state.

15 Remain attentive

–Pay attention to what you are doing. Remain

sensible when working. Do not use the electric

tool when you are distracted.

16 Check the electric tool for potential damage

–Protective devices and other parts must be

carefully inspected to ensure that they are fault-

free and function as intended prior to continued

use of the electric tool.

–Check whether the moving parts function fault-

lessly and do not jam or whether parts are dam-

aged. All parts must be correctly mounted and

all conditions must be fullled to ensure fault-

free operation of the electric tool.

–Damaged protective devices and parts must be

properly repaired or replaced by a recognised

workshop, insofar as nothing different is speci-

ed in the operating manual.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HRS800 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HRS800 Manual

Product: