781495
30
Zoom out
Zoom in
Previous page
1/160
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
30 |
15. Troubleshooting
Problem Possible Cause Remedy

switched on.

Carbon brush worn.





Power cut

Check microswitch
Check fuse, check overload switch on machine.


pressed.
Check fuses.
Due to the integrated lowvoltage protection, the ma-

the voltage, the machine must be switched on again.

planing.
Planing blade blunt/worn
Overload switch has tripped
Check microswitch
Too much chip removal
Too fast feed

Switch on the motor again once it has cooled

microswitch is pressed.



thicknessing
Cutting depth too great 
several passes
Speed decreases when
planing
Too much chip removal
Too fast feed






Planing blade blunt/worn





reduced speed

rough

moisture


cracked

the grain
Too much material planed at one
pass



low during thicknessing

the grain
Too much material planed at one
pass



Set the lever for the thicknessing setting to the top
position

chip ejection obstructed

Too much chip removal






chip ejection obstructed

Too much chip removal
Too fast feed







and thicknessing, chip
ejection obstructed (with

Suction performance too weak. 
suction connection of at least 20 m/s.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HMS1080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HMS1080 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 6.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info