644509

Scheppach hmc 3200 ci Manual

25
Zoom out
Zoom in
Previous page
1/157
Next page
Documentation
9322 0311 Page:25
In the case of short workpieces, pushing sticks or workpiece carriers have to be used. They have to be tuned to the
workpieces
For this work an auxiliary stopper has to be used. The auxiliary stopper can be self made and fixed with clamps or
something similar to the trimming stopper. See drawing no. 8..
Specified usage
The planing machine is constructed for the sole purpose of woodworking with the tools and accessories supplied.
The machine corresponds to the current EC machine guidelines.
The machine is designed for one-shift operation, operating time S 6 – 40 %.
Observe all safety and hazard notices on the machine.
Maintain all safety and hazard notices on the machine in a legible condition.
When used in an enclosed area, the machine must be connected to an exhaust system.
Use an exhaust system to remove wood shavings and sawdust. The flow rate at the suction nozzle must be 20 m/s. Partial
vacuum 1200 Pa.
The automatic turn-on device is available in the special accessories.
Model ALV 2 Item No. 79104010 230 V/50 Hz
Model ALV 10 Item No. 79104020 400 V/230 V/50 Hz
When the machine is switched on, the suction automatically runs after a 2-3 second delay. This prevents the mains fuse
from overloading.
When the working machine is switched off, the suction continues for a further 3-4 seconds and then switches off
automatically.
The remaining dust will thus be extracted, as stated in the hazardous materials ordinance. This saves electricity and reduces
noise. The exhaust system only runs when the work machine is in operation.
For industrial purposes, a dust extractor must be used for extraction.
Do not switch off or remove exhaust systems or dust extractors when the machine is running.
Only use the machine when it is in perfect condition, paying due attention to safety and possible hazards, in accordance
with the operating instructions. In particular, correct faults which could compromise safety as soon as possible!
The manufacturer‘s safety, working and maintenance regulations, along with the measurements given in the technical data,
must be observed.
Flexible exhaust lines have to be hardly inflammable.
The relevant accident prevention regulations and all other, generally recognised safety rules must be observed.
The machine may only be used, maintained and repaired by persons who are familiar with it and who have been trained
in the possible dangers. Unauthorised changes to the machine exclude the manufacturer from liability for any resultant
damages.
The machine may only be used with the manufacturer‘s original supplies and original tools.
Any other use apart from this is regarded is not specified and contravenes regulations. Any resulting damage is not the
liability of the manufacturer; the risk is carried by the user alone.
The safe function of protection devices has to be checked regularly before every start of work.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach hmc 3200 ci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach hmc 3200 ci in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 11.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scheppach hmc 3200 ci

Scheppach hmc 3200 ci Additional guide - All languages - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info