781850
27
Zoom out
Zoom in
Previous page
1/128
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 27
Oil change (g. 15 - 19)
1. Move the log splitter into the start position and pull
out the mains plug.
2. 

3. Turn the log splitter on the support leg side as

󰀨Dis


4. machine on the motor side as shown in

5.         
screw it back in to the machine that is still in a
      

6. Now screw the oil drain screw with dipstick back

splitting log several times.
7. Check the oil level one last time and top up with a
little oil if required.
Dispose of the used oil in a correct manner at a
public collection facility. It is prohibited to drop
old oil on the ground or to mix it with waste.

Connections and repairs


Please provide the following information in the event




Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol
lowing parts are therefore also required for use as
consumables.
      
splitting wedge

16. Disposal and recycling
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in


of material, such as metal and plastic. Defective
components must be disposed of as special waste.

AC motor 230 V/ 50 Hz
Mains voltage 230 Volt / 50 Hz.


   
tion of 1.5 mm².

12. Cleaning
Attention!

ing work on the equipment.



some soft soap. Do not use cleaning agents or sol

the equipment. Ensure that no water can get into the
interior of the equipment.
13. Transport

transport. The machine can be transported on the


14. Storage


The optimum storage temperature is between 5 and

Cover the electrical tool in order to protect it from
dust and moisture.Store the operating manual with
the electrical tool.
15. Maintenance
Attention!

tenance work on the equipment.
We recommend:
The splitting wedge is a wearing part that needs to
be sharpened or replaced after wear.
The combined gripping and controlling device must
remain smooth running. Lubricate with a few drops

Keep splitting wedge drive clean of dirt, wood shav
ings, bark, etc.
Lubricate slide rails with grease.
When must the oil be changed?
Change the oil after 150 working hours.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HL760L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HL760L in the language / languages: English, German, French, Polish, Swedish, Finnish as an attachment in your email.

The manual is 5.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info