781858
21
Zoom out
Zoom in
Previous page
1/112
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 21
Cylinder speed (fast fwd.) cm/
sec 3,08
Cylinder speed (return) cm/sec 5,29
Hydraulic uid capacity l 3,5
Operating pressure bar 208
Motor speed 1/min 2800
Subject to technical changes!
Noise
m WARNING: Noise can have serious effects on
your health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.
8. Unpacking
Open the packaging and remove the device carefully.
Remove the packaging material as well as the pack-
aging and transport bracing (if available).
Check that the delivery is complete.
Check the device and accessory parts for transport
damage.
In case of complaints the dealer must be informed
immediately. Subsequent complaints will not be ac-
cepted.
If possible, store the packaging until the warranty pe-
riod has expired.
Read the operating manual to make yourself familiar
with the device prior to using it.
Only use original parts for accessories as well as for
wearing and spare parts. Spare parts are available
from your specialized dealer.
Specify our part numbers as well as the type and year
of construction of the device in your orders.
m ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, lm and small parts! There is a risk of
swallowing and suffocation!
9. Attachment / Before starting the
equipment
At least two people are required to install the
device.
9.1 Installing the base frame (g. 3 + 4)
For technical reasons of packaging, the stand must
be tted by the customer.
Use the attached hexagon bolts M6 x 16 with nut
1. Remove the hub cap and disassemble the wheels.
2. Connect all sinlge parts of the stand with the ma-
chine.
m WARNING! This electric tool generates an elec-
tromagnetic eld during operation. This eld can im-
pair active or passive medical implants under cer-
tain conditions. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.
Remaining hazards
The machine has been built using modern tech-
nology in accordance with recognized safety
rules. Some remaining hazards, however, may
still exist.
The splitting tool can cause injuries to ngers and
hands if the wood is incorrectly guided or support-
ed.
Thrown pieces can lead to injury if the work piece is
not correctly placed or held.
Injury through electric current if incorrect electric
connection leads are used.
Even when all safety measures are taken, some re-
maining hazards which are not yet evident may still
be present.
Remaining hazards can be minimized by following
the safety instructions as well as the instructions in
the chapter Authorized use and in the entire operat-
ing manual.
Health hazard due to electrical power, with the use
of improper electrical connection cables.
Release the handle button and switch off the ma-
chine prior to any operations.
Avoid accidental starts of the machine: Do not
press the start button while inserting the plug into
the socket.
Use the tools recommended in this manual to ob-
tain the best results from your machine.
Always keep hands away from the work area when
the machine is running.
7. Technical data
Dimensions
L x W x H mm 1160 x 425 x 610
Wood ø max cm 5 - 25
Wood length
max cm 52
Weight without base frame (kg) 59
Weight with base frame (kg) 64
Motor V/Hz 230/50
Input P1 W 2200
Output P2 W 1700
Rating S3 25%
Splitting Power t max. 6,5
Cylinder rise mm 370
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HL660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HL660 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 5.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info