Manual Scheppach HL400CH (page 21 of 48) (English, German, French, Italian)

781965

Zoom out

Zoom in

1/48

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 21

8. Unpacking

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage.

• In case of complaints the dealer must be informed

immediately. Subsequent complaints will not be ac-

cepted.

• If possible, store the packaging until the warranty

period has expired.

• Read the operating manual to make yourself famil-

iar with the device prior to using it.

• Only use original parts for accessories as well as

for wearing and spare parts. Spare parts are avail-

able from your specialized dealer.

• Specify our part numbers as well as the type and

year of construction of the device in your orders.

m ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plas-

tic bags, lm and small parts! There is a risk of

swallowing and suffocation!

9. Attachment / Before starting the

equipment

At least two people are required to install the

device.

9.1 Installing the handle (4) (enclosed accesso-

ries bag a) (g. 3)

Fasten the handle to the U-bar with two cylindrical

screws.

9.2 Installing the protective guard (L) (enclosed

accessories bag b) (g. 4 + 5)

1. Fit the protective guard (L) to the trunk guide plate

(5) and use the enclosed cylindrical screws and

nuts to afx it.

2. Undo the cylindrical screw with washer that is lo-

cated on the wheel bracket.

3. Fasten the other end of the strut to the protective

guard using the Phillips head screw and nut. (3)

4. Now guide the open end of the strut (O) between

the washer and the wheel bracket, tighten the cy-

lindrical screw (4) again rmly.

9.4 Installing the tray table (K + M) (enclosed ac-

cessories bag c + d + e) (g. 6 + 7 + 8)

1. Attach the tray table (K) to the same side as the

protective guard (L). Use two cylindrical screws

and spring washers to afx the table to the log

splitter. (1)

Remaining hazards

The machine has been built using modern tech-

nology in accordance with recognized safety

rules. Some remaining hazards, however, may

still exist.

• The splitting tool can cause injuries to ngers and

hands if the wood is incorrectly guided or supported.

• Thrown pieces can lead to injury if the work piece

is not correctly placed or held.

• Injury through electric current if incorrect electric

connection leads are used.

• Even when all safety measures are taken, some

remaining hazards which are not yet evident may

still be present.

• Remaining hazards can be minimized by following

the safety instructions as well as the instructions in

the chapter Authorized use and in the entire oper-

ating manual.

• Health hazard due to electrical power, with the use

of improper electrical connection cables.

• Release the handle button and switch off the ma-

chine prior to any operations.

• Avoid accidental starts of the machine: Do not

press the start button while inserting the plug into

the socket.

• Use the tools recommended in this manual to ob-

tain the best results from your machine.

• Always keep hands away from the work area when

the machine is running.

7. Technical data

Dimensions L x W x H 995 x 425 x 610 mm

Wood ø max 25 cm

Wood length max 37 cm

Weight 45 kg

Motor 230/50 V/Hz

Input P1 1500 W

Output P2 1100 W

Rating S1

Splitting Power max. 4 t

Cylinder rise 290 mm

Cylinder speed (fast fwd.) 3,86 cm/sec

Cylinder speed (return) 6,44 cm/sec

Hydraulic uid capacity 2,4 l

Operating pressure 165 bar

Motor speed 2850 1/min

Subject to technical changes!

Noise

m WARNING: Noise can have serious effects on

your health. If the machine noise exceeds 85 dB (A),

please wear suitable hearing protection.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HL400CH in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4.05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HL400CH Manual

Product: